turbo time

[black97talon]

ok guys well i just picked up a IHI turbo off of a Ford Probe, has very low miles on the rebuild and doent have shaft play. Now i have the intercooler off of the probe as well as all the intercooler pipes. I am looking at getting the Vortech FMU to start off with running 7lbs, actuated by the wastegate. Now to make sure i have everything tell me if im missing anything. Turbo, Downpipe, Fmu, Intercooler, Blowoff Valve, Oil Line kit. Ok now the motor has 89k miles i wanna run 7lbs what can i expect form that for power? Should i get a FCD? Is the FMU sufficent for 7 lbs, i know its not the best but for a temporary thing until i buld the motor this winter.Where can i buy the oil line kit at? can you guys point me in the right direction to a good build up for where to put the oil lines and coolant lines too? ive looked but havent come up with any real useful info. any info on any of this would be Greatly Apreciated ty

 

[EagleTalonTim]

Converting a N/T car is a little more complicated. Check out the Vfaq.com site about doing the conversion.

http://www.vfaq.com/FAQlocator-turbo.html

 

[dsun87]

go here for the oil lines
http://stealthmodeperformance.com/oil.shtml

and here for a 255 or 190 fuel pump
http://www.nolimitmotorsport.com/prod/GSS342-400-847

and for my car (420a) you need either a FCD or a missing link so it can intercept the boost
am usig a missing link (mechanical) FCD is electronic up to you on which one you want to use

http://www.dsmtuners.com/forums/showthread.php?t=152644&highlight=missing+link

read up on it on that forum

 

[meliketoball]

Missing an exhaust manifold?

 

[black97talon]

well i found out what the turbo was its a RBH5 dont know the trim sizes or nothing looked up on google all last night couldnt find nothing . If anyoe know this that would be cool umm as it goes for the exhuast mani, well i was thinking of making an adapter plate to my stock one is this ok to do? lemme know ty for the links guys very helpful ty

 

[black97talon]

Bump