2G Turbo feed line fittings.

[John Miller]

Hello my fellow DSM addicts!

I have a quick question that I'm hoping someone can answer. The car in question is a 1997 eclipse gs-t with the stock t25 turbo. I've been trying to source a turbo feed line, but I've decided to have a machine shop make a hydraulic line. My question is what are the exact fittings I need for the feed line? I need the fitting that taps into the OFH and the turbo itself. If I could get the exact fitting numbers that would be great. Thank you!

 

[Mello]

The OEM oil feed for the T25 turbo is 2 pieces.
MR299880 TUBE, Turbo Oil Feed (upper)
MR299881 TUBE, Turbo Oil Feed (lower)

 

[jimsgsx]

Use a stainless steel braided line. Works great for me!

 

[Craig1970]

https://www.mitsubishiautopartsdirect.com/
i like this site prices seem better too

 

[John Miller]

The OEM oil feed for the T25 turbo is 2 pieces.
MR299880 TUBE, Turbo Oil Feed (upper)
MR299881 TUBE, Turbo Oil Feed (lower)

I need the thread size since I'm getting a line made, I'm not gonna buy an oem line.

 

[19Eclipse90]

3/8 BSPT at the oil filter housing.
The T25 used a 1/4" flare type fitting for the feed line. See: t25 turbo oil feed thread pitch

Make sure you research restrictors to reduce flow required for your application.

 

[JusMX141]

3/8" BSP 90* to 4AN at the filter housing, 4AN to 1/4" tube (7/16" x 24) straight (180*) at the turbo. You'll need a .070" restrictor in the line to prevent over-oiling the turbo.