turbo air intake

[khill8469]

im looking for a good intake. their is alot out their for the non turbos. but for turbos their isnt much. so a little advice to find out witch one is the best before i buy one. thankyou

 

[rich3389]

http://cgi.ebay.com/ebaymotors/1995...ItemQQcategoryZ38634QQitemZ290093731068QQrdZ1


thats what i have fits good, just go to home depot or some place like that and get a 2.5 inch fernco from the plumbing section to connect it to the turbo because the coupler it comes with sucks.

 

[kenamond]

Or for more money and bling factor:

http://dsm.dejonpowerhouse.com/edit/2-01.htm

CIP-2gs model.

Make sure you select the proper options for your setup including the outlet diameter and the set of tubes (BOV dump, VC breather, etc.).

I like mine, but it costs a lot more than the ebay one. I'm one of those "get what you pay for" nutjobs, though.

Might want to find out if the ebay one moves the MAS at all. If it's too long, you won't be able to fit, say, a K&N FIPK in there with some UICP models, because they'll interfere. My Dejon UICP and intake pipe just barely fit with the K&N.

 

[wvturbo2]

Goto Extremepsi and look at their selection

 

[airFS]

Go for the k&n fipk air filter. I have one on my car and absolutely love it. Also according to the road race site it's good for about 10hp.

 

[400awhpgsx]

The most popular imo is the injen intake. That's what I've got and I couldn't be happier.

 

[Rice Over Wheat]

Dejon curved intake if you are are running 2.5 compressor inlet or smaller. FP 4" intake if you are running 3" or bigger. Both of these will clear a short route fmic pipe.