Swap GST don’t want to start HELP

[Heryst78]

Hi guys

I fixed my problem of yesterday, it was my starter relay...

Now, the engine is ready to go but it doesn’t want...
I did :
- All timing belt
- CAS
Everything...
I checked my fuel. I have fuel in my engine
I checked sparks, and I have electricity

Now, I don’t know what I can do

Maybe there is a security ?

Thanks a lot

 

[Heryst78]

I created a YouTube video to show you the problem...

You must be logged in to view this image or video.

And i always have this connector and I don’t know what it is...

 

[dustyboner]

what year is your car?
does your car have an immobilizer?

 

[Heryst78]

It’s an 1996 GS eclipse 4G63 swap in GST 4G63T
What is an immobilizer ?
Thanks

 

[dustyboner]

Your car is the version for the European market, correct?

Here is a link to the service manuals for the EU market: http://www.mediafire.com/file/uz7nqzs13z55j6k/2g_eclipse_FSM_European_market.zip

North American market Eclipses didn't come with an immobilizer and there was no option to add one.
The immobilizer system was an option on the EU market Eclipse.

You must be logged in to view this image or video.

 

[Heryst78]

hey guys

I post you a video from YouTube with my problem
Actually, the engine don’t want to start after my swap.

It’s a 7 Bolt from Miller Import Parts

I bought all the engine with harness and ÉCU
I changed sparks, timing belt and I made all the replacement of fluids and little maintenance.
Sparks are ok, and fuel arrived to the injectors

Do you know what can be the problem ?

Thanks

You must be logged in to view this image or video.

 

[92AWDHX40]

Are the injectors firing, do you have compression Check the no start thread. It' where you should start. Could be won many variables since you don't know condition of the parts you bought.

 

[chrysler kid]

Make sure your cam sensor and crank sensors are plugged in.

Also what cam angle sensor are you using, what year is the motor from, what year is the ECU from?

 

[motomattx]

Are your spark plug wires in the right order? try switching them.