ECMlink Stock 1G with ECMLINK ECU

[CiscoBite1Time]

I have a 93 AWD Talon. Purchased it last year completely stock and have driven it about a dozen times since. Last time I parked it about 3 weeks ago it ran fine. This past weekend I went to start it so and no start. It cranked fine and was getting gas at the fuel rail. Stock boost gauge was not responding and no CEL. My research on here lead me to swapping in a used ECMLINK ecu I purchased and been waiting to put in. It fires up but of course very rough. I went ahead and changed all the previous owners config. I think I got everything back to stock setup. Car is still hard to start. I bottomed out the BISS screw and it took 7 full turns of the BISS screw to get the car to start and stay running. Sometimes it's still hard to start especially from a cold start. Idle now sits at about 1300/1400 rpm if I leave it running. If I screw in the BISS screw the car is back to hard to no start. Anyone willing to look at the cold start captures and possibly see what I'm missing?

 

[dwb]

You have a lot of tables in Direct Access that are not stock. Everything in bold on the left are modified. Use the black <-> arrow on the top tool bar to toggle the stock settings and save to ECU.

Not your issue right now but you have no knock control, make sure you fix that.

You must be logged in to view this image or video.