a1320eclipse
20+ Year Contributor
- 176
- 1
- Mar 26, 2003
-
Spokane,
Washington
I picked this ramhorn RnR Evo manifold for $20 which had been setup for a big BW s372 on my buddys 2G. And proceded to try to make it work on my 1G. the turbo sat waaay to low, there wasnt a gravity fed oil return as the return from the turbo was even with the return on the pan. So i took it upon myself to cut some things off and make it work, this is where im at so far.
This was with a tiny T3 that the comp housng was about an inch from hitting the lower cross member. This is how it was when i got it.
And I did this with it.
The exhaust is gonna be a little cramped, but not bad at all. What do ya guys think?
This was with a tiny T3 that the comp housng was about an inch from hitting the lower cross member. This is how it was when i got it.
You must be logged in to view this image or video.
And I did this with it.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
The exhaust is gonna be a little cramped, but not bad at all. What do ya guys think?