SAFC settings on mine from his (WRX to GST)

[my98GST]

I was having a little chat tonight with one of my buddies who owns a WRX with a SAFC installed. We are both running practically the same setup. He is running a 50 trim and I'm running a 20g, both are td06h inlets but his exhaust side is slightly larger than mine. We're both running 550cc injectors, along with an Aeromotive AFPR and a 255LPH FP.

We were curious as to if we could just transfer his settings over onto mine and it run some what the same. Their both 2.0L's and have roughly the same compression and such. Let me know what you guys think.

 

[spoolup]

Every car is different, even 2 of the same year DSMs running the EXACT came setup. Just follow the advise on tuning from the tech articals or RRE. BUT I would not trust my engine just because I didnt want to spend the time to do a few logged pulls, ect. Also subis run a little different due to cylinder #3 (belive that to the correct one) since the engines are horizonitally opposed and the hose having to cross the fuel between the 2 rails. Perrin made a fuel kit to combat this, but im going off topic. I would borrow a ODB-II logger from another DSMer, or whoever for that matter, and actually tune it. Since I have seen in excess of 10% difference from the same set up on the same model car.

 

[kottyking]

^^^I agree 100%. Every car is different.