2G Rotors won’t fit over e brake

[Bedicine]

rotor won’t go on still but it’s very close. That definitely made a difference

 

[bigfred]

Based on the part number you gave in your first post those rotors are for the 99-03 EVO.
Here is a link to what EBC shows that fits the 2GB GSX

https://ebcbrakes.com/vehicle/usa/MITSUBISHI/Eclipse/

EBC Turbo Grooved Rear Rotors GD7108
EBC BSD Grooved Rear Rotors BSD7108

 

[fourgsixty3]

Based on the part number you gave in your first post those rotors are for the 99-03 EVO.
Here is a link to what EBC shows that fits the 2GB GSX

https://ebcbrakes.com/vehicle/usa/MITSUBISHI/Eclipse/

EBC Turbo Grooved Rear Rotors GD7108
EBC BSD Grooved Rear Rotors BSD7108

He's running the Evo Brembo rear calipers so based off what I've read that Evo rotor should work.

 

[Bedicine]

He's running the Evo Brembo rear calipers so based off what I've read that Evo rotor should work.

Correct. I have a stock rotor here and it’s the same opening size just smaller overall. You can’t run a stock rotor with the evo caliper.

Neither rotor is fitting over the parking brake currently. It’s barely hitting the shoe

 

[bigfred]

He's running the Evo Brembo rear calipers so based off what I've read that Evo rotor should work.

Yeah I missed that part. Sucks getting old.

 

[Widgmaster]

In the pic, it looks like there is a sleeve of some sort where the two shoes meet. Can that be removed to give more room for the shoe to come in a bit.

You must be logged in to view this image or video.

 

[Bedicine]

No sleeve

If I take of the adjuster the rotor slides on no problem.

 

[Bedicine]

tried the passenger side. Loved the adjusted and it bolted right in. I think I’ve found the issue. The side that’s rubbing is the only hub that has been rebuilt as the awd rear right sides were out of stuck. Go figure it’s the only one not fitting even with the new wheel studs

You must be logged in to view this image or video.

 

[Bedicine]

Put wheel nuts on two of the studs on the other side and gave them a slight tap. Rotor now fits after the adjustments. Thanks for the help everyone

You must be logged in to view this image or video.