oil feed line

[d-meeks]

Hey got a quick question =I just got an oil feed line to replace mine and there is a copper oring and I was wondering were it goes.

 

[92AWDHX40]

On the end that feeds the turbo.

 

[jpmxrider489]

There should be one on each side of the line. There should be two.

 

[d-meeks]

i just got the kit and it came with one and which part that feeds the oil the screw that goes inthe turbo or the part that screws into the screw that goes in the turbo

 

[davidalindsey]

Could you provide a link of where you got the kit from?

 

[jimbob_843]

The crush washers go on both sides of the line end piece, on the turbo side. Should be turbo,washer,line end,washer,then bolt .

 

[d-meeks]

EXTREME PSI : Your #1 Source for In Stock Performance Parts theres a link but when i took mine off it didnt have any

 

[crash89]

In the case of that line in the link. Your copper crush washer should go down on the turbo then threaded fitting then thin 90* end. The thick 90* goes in the oil filter housing.

 

[davidalindsey]

^^^
What he said