Manual Trans with Auto Harness

[Wackyeyes]

1997 Eclipse GST
Manual Trans

I have swapped out the engine, computer, and wiring harness from a 1995 Auto Trans Eclipse GST.

Now the car runs and drives fine but the problem I am having is that I cant get the ignition to give power to the starter.

I have a remote starter switch hooked up to the battery and starter for now but I do not know what wires need to be jumped on the Auto Trans wiring harness to disable the computers park/neutral safety switch so the computers thinks it is in Park.

Any help would be nice.

 

[luv2rallye]

Problem is the manual starter relay works just the opposite of the auto starter relay (one opens, the other closes). The easiest thing is to jumper (should really solder) the starter relay's black-red wire to the black-yellow. You can remove the relay or leave it in. If you have the factory theft alarm you may also have to jumper the theft alarm relay's black-white to it's black-red if it's not working (it's also opposite). Both of these mods will bypass the relays. If you really need the factory theft alarm working, pm me.

 

[brobo]

Yea like he said its a safety switch which the automatic uses but all you have to do is jump the center row pins , the one farthest to the right and left and jump them
http://www.dsmtuners.com/forums/attachment.php?attachmentid=137576&d=1334331031