kiggly flexplate; long dowels

[eclipsalon]

Just got the 2g kit and my cars been sitting for awhile, long story short, i must be forgetting where a few bolts go because i cant seem to figure where I'd put these dowels?

 

[99gst_racer]

The long dowels replace the OE dowels found at the corners of the block. They are the dowels that locate the engine to the transmission. They're longer to account for the thickness of the spacer plate.

 

[eclipsalon]

Yea it took awhile to figure out since my oe went MIA. But what now i cant figure where bolts hold the tranny on. The tranny has 5 holes to bolt to the motor. Ive got the top 2 on and the one on bottom front that sits in the dowel on. The second to the bottom front seems in mid-air. The bottom back bolt seems to go in from the motor side to bolt up the tranny but seems a lil weird to me since its threaded on the motor side as well? Any guidance is much appreciated!

Lol just remembered this isnt my stock motor its a 6 bolt so its gonna have an extra tab. Lol also found my oe dowels! On stock 7bolt motor?