hx35 into Bep housing

[DSM Chase]

How does the hx35 secure into the BEP .55ar bolt on housing? I read per the holset faqs its 6 bolts? Am I missing something I don't see how the center section can bolt on?

Heres mine

You must be logged in to view this image or video.

 

[406talon]

Are you looking to see how the exhaust housing bolts on?

 

[Boosted6]

https://gpopshop.com/wp-content/uploads/2010/07/t3t4webkit2.jpg

 

[DSM Chase]

Are you looking to see how the exhaust housing bolts on?

Correct

 

[gieri002]

Your hx35 will bolt right up to a .55 bep housing. The 6 bolts are what secures the metal "clamp" pieces to the hot side as you can see in the diagram above.

 

[JusMX141]

Six bolts and 3 hold-down clamps which should be included with the turbine housing....the same as any HX35, HX40, or T3/GT Garrett.

 

[DSM Chase]

Were can I find these clamps? Are these oe holset parts or from Bep?

 

[gieri002]

You can use the OEM ones, I'm not sure if bep makes them. I have a couple sets, I'll send you a pm

Here is a pic I found online so you know exactly what you are looking for:

 

[JusMX141]

Were can I find these clamps? Are these oe holset parts or from Bep?

From anyone who deals with turbochargers on a routine basis. I have hundreds.

 

[DSM Chase]

Part #s??

 

[JusMX141]

Holset # 2839879.

 

[DSM Chase]

Thanks justin! Luckily I have a cummins diesel shop near my house!

 

[JusMX141]

Haha lucky, indeed- if they do any amount of turbo repair on the premises, they should have a box full like I do.

 

[DSM Chase]

You must be logged in to view this image or video.

Hooked me up!!

 

[JusMX141]

That's the stuff!