1G first uploaded log. is car running like it should?

[wolf alchemy]

I'll do two second changes, and I'll start at idle and go for a bit. This log odly has very little knock.
25.000
RPM-1187
INJD-2.3%
KNCK-0
TIMA-17°
MAP-0.71
OILP/-1.56
OILT-66
27.000
RPM-1218
INJD-2.3%
KNCK-0
TIMA-17°
MAP-0.69
OILP/-1.56
OILT-66
29.000
RPM-1437
INJD-3.9%
KNCK-0
TIMA-23°
MAP-0.93
OILP/-1.89
OILT-66
1 sec difference for peak timing
30.000
RPM-1968
INJD-2.3%
KNCK-0
TIMA-37°
MAP-0.49
OILP/-1.59
OILT-66
Back to two sec then skipping ahead
32.000
RPM-1375
INJD-2.3%
KNCK-0
TIMA-19°
MAP-0.66
OILP/-1.59
OILT-66
36.000
RPM-1218
INJD-2.3%
KNCK-0
TIMA-16°
MAP-0.67
OILP/-1.56
OILT-66
38.000
RPM-1218
INJD-2.3%
KNCK-0
TIMA-16°
MAP-0.68
OILP/-1.56
OILT-130. Has started to jump from 2 to 130. Is this normal?[DOUBLEPOST=1412394372][/DOUBLEPOST]Bump[DOUBLEPOST=1412394749][/DOUBLEPOST]Hope this moves this thread to recent.

You must be logged in to view this image or video.

 

[Burst]

Its says KNCK 31 in the pic which dose not look good. the OILT should incress when the car gets warm If the knck said 31 then keept reading 0 maybe the sensor went bad. I am looking through to learn though I am not that knowledgeable just thought Id give you a bump
if the OILT incress form 2 -130 it may be bad o2 or something I was reading below
http://www.dsmtuners.com/threads/help-poor-idle-good-drivability-new-logger.471866/#post-153350553
search 1st log and you can find info like below
http://www.dsmtuners.com/threads/1st-log.459226/#post-153219658

 

[synthetek]

MMCD cant log oil temp or oil pressure on a 1g so those numbers don't mean anything.

 

[Mischif]

Did you make sure to setup the preferences in the option menu? DSM for vehicle, and set the base time to whatever you have yours set at. Anyway, 1g's don't have a map sensor, that option is probably for 3ks. Log MAF instead. As for that knock in that screenshot, looks like phantom knock. May need to replace the knock sensor. You should be logging alot more than what you listed.

1st page you will want to log rpm, injd, knck, tps, tima, o2-f.
2nd page you will want to log everything
3rd page you will want all 3 ftr's and mafs
4th page you log nothing from it.

It'll be easier if you just post a copy of the mmcd log file instead of trying to write it out how you were.

 

[wolf alchemy]

Did you make sure to setup the preferences in the option menu? DSM for vehicle, and set the base time to whatever you have yours set at. Anyway, 1g's don't have a map sensor, that option is probably for 3ks. Log MAF instead. As for that knock in that screenshot, looks like phantom knock. May need to replace the knock sensor. You should be logging alot more than what you listed.

1st page you will want to log rpm, injd, knck, tps, tima, o2-f.
2nd page you will want to log everything
3rd page you will want all 3 ftr's and mafs
4th page you log nothing from it.

It'll be easier if you just post a copy of the mmcd log file instead of trying to write it out how you were.

Oh trust me. I'd love to just put mmcd log file. But my logger seems to love doing one sync. Then the computer rejects it and it never syncs again.

 

[1990dsmkid]

Take pics of palm screen with cell phone then upload those pics

 

[wolf alchemy]

My camera doesn't work. So I'll upload some logs that I did manage to get tomorrow night.