First Dyno

[wird06DSM]

Well I was at a friend of mines shop and we threw my car on the dyno. Here is what I have.


96 GST
Stock 7bolt

E316g Ported
Ported Stock Manifold
XS power 02 Dump
Greddy/ Denso 660's
SAFC
Intake Snorkel
Punishment Racing UICP
ACT2100
Fidanza 9lb Flywheel
Prothane Mounts
Greddy BOV
Full 3in Exhaust
I think thats it heres my dyno chart

You must be logged in to view this image or video.

 

[xi Talon ix]

how many lbs. were you pushing out of that 16G for this run?

 

[supermech21]

yes we need more info... gas? Boost?

Just tuning with a SAFC, how much fuel are you pulling? Without a intercooler up grade i would suspect your getting kind of hot...depending on the boost

 

[wird06DSM]

93 octane and Im pulling alot sadly, I hate it. Also I forgot to add the 190lph Walboro, and I got a FMIC next to me right now picked it up tonight. My boost guage said 20 but there map sensor said 16. I dont get why my guage is off.

 

[spoonman]

My boost guage said 20 but there map sensor said 16. I dont get why my guage is off.

Where is your boost gauge's pressure source located and where was the dyno's source located?

 

[98eclipsekidd08]

Seems right, I have same mods (few more) and dynoed at 266 on 15psi and 94 octane. this was tuning with a apexi neo. (this was on my stock clutch and no cams). Hope to hit the dyno again soon.

 

[wird06DSM]

Theirs was on the nipple behind the TB and mine is on the line going to the FPR on the end of the Intake Manifold like VFAQ said.

 

[98eclipsekidd08]

Theirs was on the nipple behind the TB and mine is on the line going to the FPR on the end of the Intake Manifold like VFAQ said.

Tap yours where they did off the TB on the port closest to you, or atleast thats where mine is and works fine for me.

 

[XilArAtiNG]

98eclipse what is your fuel setting on your neo? I basically have the same set up as all of you butwith 550ccs, jus wondering what everyones running for fuel numbers..

 

[wird06DSM]

Im pulling close to 40% in some areas and look at my AFR its mid 10's, yea Keydiver is my next step.

 

[XilArAtiNG]

pulling as in + on the afc correct?

 

[wird06DSM]

Yep -40 %

 

[JayRolla]

Some timing control would help a lot. You could pull timing, and add a lot more boost. Not bad for 16psi. May be a little rich and robbing some power.