Evo 8 560cc injector Deadtimes/latency

[goldeninja20]

Finally got my 560cc injectors today. Put them on. I flashed my ecu, i changed settings to 560cc scaling and deadtimes to:
16v .628
14v .748
12v .928
10v 1.208
8v 1.688
6v 1.900

I am not sure if these are right, i found them on a forum and no one confirmed. My problem is now i am getting a very bad misfire. I am also getting a CEL P0300 (misfire). Everything was perfect before changing my injectors, is it the injectors, or my tune? Thanks in advanced.

 

[Aproductions]

When I dropped mine in they were fine, I can look when I get home on ecuflash

 

[goldeninja20]

When I dropped mine in they were fine, I can look when I get home on ecuflash

If you could that would be great. How soon? Also on ecuflash i dont know if i should set bits 4 and 5 to 0 or 1. They are the bits for P0300.

 

[goldeninja20]

I am having trouble finding an accurate deadtime/latency for the evo 8 injectors. I have found 2 different sets of numbers. I will be changing the deadtimes in ecuflash, if someone could give me them that would be great. Also what do you guys scale them at? Since the word is that they flow higher than 560cc.

 

[Chicken Patty]

I am having trouble finding an accurate deadtime/latency for the evo 8 injectors. I have found 2 different sets of numbers. I will be changing the deadtimes in ecuflash, if someone could give me them that would be great. Also what do you guys scale them at? Since the word is that they flow higher than 560cc.

Injector info you need is in here: http://www.dsmtuners.com/forums/articles-tuning-ecu/407715-how-get-basic-tune-ecuflash.html