Evo 560cc fuel injectors

[shhh i know]

Recently got my 2g mas and super AFC II shipped and am ready to hook them up, however first I want to get my new fuel injectors and do it all at once. I see a lot of people recommending EVO 560cc injectors and am thinking of going that route. My question is are the EVO 560s a direct swap? I mean are they low impedance and will they plug right in to my current factory wires?

Thanks for any help you can supply!

 

[Dxc545]

yes they are a direct swap, just need a tune

 

[Kalub]

Yep, they plug right in. They're close to the size limit for a SAFC on pump gas as well. If you want to go bigger you'll need another controller such as ECMLink.

 

[Spanky_DSM]

They are a good upgrade, plug and play.

Even on stock turbo.

Its a nice way to keep IDC's low/

Defint get a afc or maft, but ecmlink is highly recommended for the price comparison along with its features.

 

[2g spyder eclipse]

Currently running my 560's on safc-2 16g turbo 20psi. 90% IDC's they work well.

 

[shhh i know]

Thanks for the quick support, im going to order sum tonight!

 

[Spanky_DSM]

Make sure to have a logger on board.

Im not sure if the safc logs knock on the 1g, but for sure it doesnt on the 2g(gives ridiculous readings)

 

[2g spyder eclipse]

Evoscan for 25$ and a cable for 10$ and you are set to log.

 

[Dude McGee]

The 2g maf makes a 1g run about 20% more lean. the 560s will make it about 25% fatter, so they compliment eachother very well. an safc will work with minimal adjustment.

also, does evoscan work on a 1g ALDL system?

 

[shhh i know]

My question a similar to the above post. I started looking at the evoscan, never heard of it before now. Then I started searching threads to find out if it really does work on a 92 eagle talon tsi and how well. Has anyone put one on there and to what success?

Would I need to modify my factory ecu at all?

 

[Dsmkauai]

I'm pretty sure evo scan and those types of software only work with the 98 blackbox ecu, or evo 8 ecu. Atleast from what I've read it's a real pita to get working with 95 EPROM or any older ecu.

 

[2g spyder eclipse]

I am using evoscan on my 97 no problem.

 

[Dude McGee]

http://www.dsmtuners.com/forums/evoscan-ecuflash-tuning/352077-jaw-evoscan.html

Apparently it does work on a 1g.

 

[shhh i know]

I have a logger. Went with the Zt-2 from Zeitronix. Eventually I'm going to add the boost sensor to it also. Thanks for the help and keep boosting!

 

[habitatguy187]

It's known that the evo560s actually flow around 590cc. If you're running too rich either add some e85 in there or get something to tune with.