ECMlink ECMlink flex fuel sensor not logging

[deboelduro]

guys I finally hooked up a gm flexfuel sensor with the ECMlink plug and play harness. I checked the plug for voltage and the red wire has 0.5v. I also enabled the sensor in ECMlink and not logging. Is a brand new sensor. My car has a 2g maf plug which is why I bought the 2g adapter. Any help would be greatly appreciated. Thanks

 

[motomattx]

If its a clone/fake its junk, it needs to be a genuine GM unit and even at that it needs to be from Summit Racing or the like, that particular part is knocked off and cloned in China more often than real ones are sold.

 

[deboelduro]

@motomattx i figured it out. I didn’t have the 12v power connected in the right place. Now everything works

 

[motomattx]

Awesome!

 

[El único95GSX]

@motomattx i figured it out. I didn’t have the 12v power connected in the right place. Now everything works

Hey bro I’m having the same issue can you post a picture how you wired to fix it please

 

[AWD-Tony]

Hey bro I’m having the same issue can you post a picture how you wired to fix it please

Go down to Wiring

ethanolsupport [ECMTuning - wiki]

www.ecmtuning.com

 

[El único95GSX]

Go down to Wiring

ethanolsupport [ECMTuning - wiki]

www.ecmtuning.com

That’s how I did it but I will doble check. Thx