The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI
motomattx

Latest activityPostingsVehiclesAbout

    • motomattx
      Here is a different mounting look if you need to lay it horizontally.
      • reg.JPG
    • motomattx
      motomattx replied to the thread 1G Are these usable?.
      I have used a rod with "some" blue on the big end when there was no evidence of a spun bearing in the journal, I did have it resized though and the machine shop said it was good to go and not to worry about it.
    • motomattx
      motomattx replied to the thread 2G 97 GS trade for GST.
      I would just offer to buy the shell from him and be done with it, and make sure if you do that its delivered to your house with a good title before you pay for it.
    • motomattx
      motomattx replied to the thread 2G 97 GS trade for GST.
      The newer or older 7 bolt is not too bad, you would want a 98'-99' if you can get one, or even a 93'-94' are decent versions too, but they mount like a 6 bolt would.
    • motomattx
      motomattx posted a question on the classified ad For sale 2g 2G Belt Molding Set.
      Are these new or used? they look pretty clean if they are used.
    • motomattx
      motomattx replied to the thread Heavy tools.
      Well, the preferred brand for me is OTC, which you already poo poo'd, other than that its the Freight of the Harbor, or even parts store brands.
    • motomattx
      motomattx replied to the thread News about Joe Bucci.
      Oh man, the Shootout wouldn't be the same without his energy there. Does anybody know if he has had health issues in the past?
    • motomattx
      Thats normal for a good running engine, its just fuel deposits from decades of running.
    • motomattx
      I would say that the car is worth what they are asking for it, you wont find many that are that clean, for any amount of money for that matter, some will say that its a bit steep, but find another one for less, not likely, these cars are toys and...
    • motomattx
      motomattx replied to the thread Valentine’s Day.
      It sounds like you have a good deal, your either lucky or luck had nothing to do with it and you just made an understanding between the two of you, either spoken or unspoken, my feelings are probably from observing my own parents, my dad was a...
    • motomattx
      motomattx replied to the thread Valentine’s Day.
      100% spot on, EVERY holiday is about females in this modern society, there are zero expectations for women, when do men get a day? fathers day? thats a joke, there is no pressure for women to buy or do anything for men on fathers day, nothing...
    • motomattx
      What engine is in the ES? those can come with the 1.8 engine also.
    • motomattx
      motomattx replied to the thread 2G Oil pan level sensor.
      What country is that diagram for? American DSM's don't have oil level sensors.
    • motomattx
      Thats rod knock folks.
    • motomattx
      Sure, you can use the fuel pump check connector if you have one.
    • motomattx
      motomattx replied to the thread State of affairs :-D.
      Keep in mind that it IS the off season for hot rods right now, some of us are in winter mode and just getting other things in life dealt with and taking a break before jumping back into things.
    • motomattx
      Have you tried sending power directly from the battery to your fuel pump and then trying to see if it runs?
    • motomattx
      Is the ecu from a convertible by chance?
  • Loading…
  • Loading…
  • Loading…
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top