The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Custom exhaust

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TiniacosMotorsports

Proven Member
34
2
Nov 25, 2014
pensacola, Florida
I'm looking to do my own custom exhaust on my 97 gst. I have a greedy Evo 2 muffler that I want to use with the custom set up what size pipes should I use and what down pipe ? Any one have a video of their custom exhaust?
 
Well it kind of depends first off. What o2 housing are you using? That will help determine what downpipe to use. I would suggest 2.5/3 inch for a exhaust set up. I fabbed my own. But not everyone is a welder
 
2.5 for the DP is good as if you get or have a 16g it will help towards no boostcreep as 3" is too much on the DP unless your thoring down huge numbers! 3" from DP back is fine. I also built my own system but i have the Punishment racing o2 housing and that was 2.5" exit so i just stuck to that side from there.

Even 2.5" all the way through is more then enough to support a good amount of power so it depends on that aswell and 3" will give it a more deeper tone if you run no restrictors or silencers aswell,
 
I built my own, 2.5" dp, 2.5" from dp to back with a 3" stright through muffler and tip all in stainless steel, hope this helps
 

Attachments

You must be registered for see attachments list
You cant go wrong With 3" pipe.Thats what I would do so if you ever upgrade you don't have to do it over.
 
You cant go wrong With 3" pipe.Thats what I would do so if you ever upgrade you don't have to do it over.
You can actually. You can create boost creep morebor sid the arrival of it. Its not the best way to fox it but 2.5" is plenty good enough for 500-600 ish hp, granted porting the wg area and external is best but you can avoid it by at least keeping a 2.5" DP. There are plenty of threads on here about this and the majority of them pont this out aswell, so harm can be done by going 3" all the way. Again unless your making crazy numbers or running massive boost then this wont be an issue
 
I'm looking to do my own custom exhaust on my 97 gst. I have a greedy Evo 2 muffler that I want to use with the custom set up what size pipes should I use and what down pipe ? Any one have a video of their custom exhaust?
I built my own with 2.5" all the way back and a megan racing muffler. I also put in an exhaust cutoff before the cat for track days :)
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

  • For sale Misc Left Over Parts
    Hello, I have a few left over parts for sale, these do not include shipping, please pm me for a...
    • r3dmak
    • Updated:
    • Expires
  • For sale Alpha Injection Clinic 2200cc for 4G63 DSM/EVO
    I have a set of Alpha Injection Clinic 2200cc high z injectors for DSM/EVO. I am stepping up to...
    • spoolinpos
    • Updated:
    • Expires
  • Wanted WTB 2g half rad
    ISO of a 2g koyo half rad or something equivalent.
    • Michael Wucher
    • Updated:
    • Expires
  • For sale Coilover Springs
    Used pair of Eibach coilover springs from an old set of Ground Control coilovers. 2.5" inner...
    • RamenPride
    • Updated:
    • Expires
  • For sale 4G63 Mitsubishi logo early valve cover
    Early Mitsubishi logo valvecover. “1990” All threaded holes are good. Has the 90 style vent...
    • Galant665
    • Updated:
Back
Top