COSWORTH HEAD GASKET vs MITSU MLS

[2mchbst]

Anyone running a Cosworth Head gasket on there 1g or 2g motors and anyone have any input to weither this gasket seals better than the Mitsu MLS gasket?
Dsport Mag just did test and showed with the Mitsu gasket vs the Cosworth gasket and how the Cosworth gasket sealed better around the cylinders when torqued down.

 

[Strm Trpr]

The only 4G63 Cosworth makes a Head Gasket for is the Evo IV-IX...

 

[2mchbst]

The only 4G63 Cosworth makes a Head Gasket for is the Evo IV-IX...

Your slightly right, they make it for evo 4-8 and 9-10, but i just realized that is the newer motor. The evo 3 and below are same as 1g's and 2g's

 

[Strm Trpr]

The only 4G63 Cosworth makes a Head Gasket for is the Evo IV-IX...

Your slightly right, they make it for evo 4-8, 9 and 10, but i just realized that is the newer motor. The evo 3 and below are same as 1g's and 2g's

I reworded your statement for ya!

Care to explain to me how I'm slightly right.
Evo's IV-IX are 4G63's are they not?
IX's have MIVEC hence the different HG part number.

Evo X's are 4B11's, so it's not a 4G63...

unsubscribed

 

[redleader36]

this was on jdm-insider a while back:

You must be logged in to view this image or video.

this is a side by side comparison of the seals of each head gasket. I won't link to the original article because it brings up a virus warning.

There is a thread here on the subject: http://www.dsmtuners.com/forums/newbie-forum/291656-cometic-headgasket.html

 

[2mchbst]

I reworded your statement for ya!

Care to explain to me how I'm slightly right.
Evo's IV-IX are 4G63's are they not?
IX's have MIVEC hence the different HG part number.

Evo X's are 4B11's, so it's not a 4G63...

unsubscribed

sorry your right< read your post wrong before i put up mine