Boost Controller Problem

[EclipseGSX1995]

I got a Greddy Profec A boost controller. Today I turned it on for first time since I got the car. When boost controller is off, it maintains its factory 10-12psi without any problems, but after I turned on Greddy Profec and set it to 14-15psi it acted weird. It goes to about 5k RPM doing stock boost and suddenly boost starts to climb very fastly. I did not hold it until it stops climbing, but I saw it climbing to more than 20 psi. Since I have stock injectors it looses power when boost jumps so high, so i just lift my foot from the gas. Now i turned boost controller off and it is running stock boost without any issues. Do you have any suggestions what is causing boost jump?

 

[BLKGSX23]

I got a Greddy Profec A boost controller. Today I turned it on for first time since I got the car. When boost controller is off, it maintains its factory 10-12psi without any problems, but after I turned on Greddy Profec and set it to 14-15psi it acted weird. It goes to about 5k RPM doing stock boost and suddenly boost starts to climb very fastly. I did not hold it until it stops climbing, but I saw it climbing to more than 20 psi. Since I have stock injectors it looses power when boost jumps so high, so i just lift my foot from the gas. Now i turned boost controller off and it is running stock boost without any issues. Do you have any suggestions what is causing boost jump?

Electric BC?

 

[EclipseGSX1995]

Yes it is electronic boost controller.

 

[blackhawkgsx]

maybe adjust the gain ?

 

[Marty Staggs]

Go through your programming. You just dont have it set right.

 

[jed344]

has to be under settings sence installing it is almost impossible to mess up were to hook what.