B&M oil cooler setup on 90 oil cooler. Help ! Need fitting sizes. They sent wrong one

[95EclipseGST]

I just got this 90 oil cooler and the whole B&M oil cooler kit with these blue couplers etc. None of the couplers screw into the B&M oil cooler. The threaded holes on this B&M are too big. What size do i get to fit these? Also the blue fittings they DID send with it dont even properly screw into the oil filter housing. They are a close fit, but the thread tap size is wrong. I can only get it to thread about 1 and a half turns before it binds. At least do you know what thread size the 1990 oil filter housing outlets are? Im so pissed at the place i ordered it from but cant wait another week to get them to send the right things in the mail. Anyone know what size threads and fitting that the 1990 oil cooler holes are? Is there anywhere in town i can get the right fittings? Auto parts store etc? I have no wheels to drive around, so i need to try to find out what these thread sizes are and get a ride somewhere. I need my car running fast. Please help. I cant believe that NONE of these little blue fitting either fit the 90 oil filter housing NOR the B&M oil cooler. Aggh ! Help with what size fittings please.

 

[92tsiawdguy]

16x1.5mm for ofh and 1/2 pipe thread for the cooler

 

[95EclipseGST]

Anyone know if Home Depot, Lowes, or an auto parts store would have these fittings? I have to get a ride somewhere cause my car is down and need to find where i could possibly go to get them. I dont even see fittings those size online with vendors? I see -6 and -8 AN line etc ,but no 16X1.5 or 1/2 pipe thread. Thanks again

 

[300dollarGSX]

Assuming you have -8 AN hose and fittings and your cooler has 1/2" NPT threads, then this page has straight, 90 degree, and 45 degree fittings:
Summit Racing -8 AN to 1/2" Pipe Fittings

And for the filter housing these are the straight cut 16mm x 1.5 to -8 AN adapters (again, assuming -8 AN hose and fittings):
Summit Racing straight cut 16mm x 1.5 to -8 AN adapters

 

[95EclipseGST]

Awesome ! Thank you so much for the help ! That what i was looking for.