stiggity99
10+ Year Contributor
- 231
- 4
- Mar 31, 2011
-
York Haven,
Pennsylvania
Greetings:
I just finished installing a brand new transmission/axles/clutch/pressure plate/release bearing/battery, and starter, and it's cranking over very very slowly. In the AM its a little faster, but if it gets too operating temperature, and i park and shut down.. when i return,it spins over sickining(sp) slow,almost to where im amazed it was enough to fire the engine. I replaced, clipped, trimmed, and cleaned all the connections going to the positive terminal, and even tested the charging system and its all 100%, just slow cranking when its cold, and very slow cranking while it's hot.. Any thoughts??
-Thank You,.
--Steve
I just finished installing a brand new transmission/axles/clutch/pressure plate/release bearing/battery, and starter, and it's cranking over very very slowly. In the AM its a little faster, but if it gets too operating temperature, and i park and shut down.. when i return,it spins over sickining(sp) slow,almost to where im amazed it was enough to fire the engine. I replaced, clipped, trimmed, and cleaned all the connections going to the positive terminal, and even tested the charging system and its all 100%, just slow cranking when its cold, and very slow cranking while it's hot.. Any thoughts??
-Thank You,.
--Steve