I'm in the process of resealing my 1.8, and only after taking off the flywheel did I discover I can't find the 4g37 bolts online. Will the 4g63 ones work?You must be registered to see element.

Thes posts surrounding my issue on this forum will borderline give you a stroke.After fixing my clutch drag issue and starting the car twice with 0 drive time I am now dealing with a car that turns over but doesn't crank.My car does NOT have a starter plate as it is broken however only the...

This might be a dumb question but ive never pulled a transmission untill today and can use some help. I just got my tranny pulled out to change a bad clutch. I had bought a south bend a few days ago. You must be registered to see element. I've noticed the flywheel also needs to be replaced. And...

I recently got burned by a shop that resurfaced a flywheel for me and messed up the step height. I asked them for measurements when they finished it and the person I was corresponding with didn't do the actual machining so they didn't have the measurements but assured me that it would be in...

Hey all, I'm going to be changing the clutch in my '91 Galant VR4 (6 bolt) because the previous owner had installed a twin-disk Competition clutch and it's honestly undriveable in a DD setting. I already had the car de-tuned way below where it was at before and it's sitting well below the torque...

Hello guys. I got a problem with my 2g. I’ve got a 97’ 2G with a 4g63 manual transmission. I was driving on the Autobahn when my car startet to rev in gear but slowed down. I made it to a parking lot and tried to drive off again but it would just rev but not move. So I towed it home and changed...

First time clutch job too! With future goals in mind, should I just upgrade now or is it too much for stock components? I do have pretty new master and slave cylinders if that is worth mentioning.Also seen in lots of old threads and other sites not to use Fidanza/other aluminum flywheels...

You must be registered to see element. is it okay to put this transmission back in? Or should I buy a new one instead? It came off when I got the transmission off and I saw the crack when I was unbolting it as well.

I'm taking the winter off time to research various tasks I'll have to perform on my '92 Talon TSi AWD manual come spring (way too cold to do anything serious on the car for me right now, especially with an 18" blizzard about to hit tonight and temps in the teens).One is figuring out whether to...

First thanks to everyone who's chimed in with tips and advice to help me diagnose and fix the various issues with my clutch system and trans. It's helped a lot even though there are still issues yet to be resolved (through no fault of anyone but myself and the fact that there are so many of...

Yet another entry in the seemingly endless saga of my Talon "restoration" (more like getting it back in good enough shape to pass inspection and drive for now). Apologies for so many of them.I took my flywheel to be resurfaced today and the machinist said that between the glazing, warping and...

I put this together so you’ll only need this page for most torque specs to replace rear main seal, flywheel, clutch or manual transmission.I left off simple items like slave cylinder, downpipe and other small brackets/miscellaneous items.Rear main seal 7-9 ftlbs Oil pan bolts 5 ftlbs...

Fastest way for a response is to text Jim at 517 four 0 four 2976Fidanza Aluminum Flywheel, 2G, 7-Bolt , FWD, P/N FI-161781 You must be registered to see element.Needs friction surface ( replaceable), best price I found was $75, free shipping at; You must be registered to see element...

Parts been siting in my garage no longer need them$50-Walboro GSS342$10- Oem Fuel Filter$20-2x Injector Resistor box$100-VC 12-an fitting had a small crack was welded works fine it is shaved$30-Moroso Oil catch can -12 an fitting to go within VCPM or text me 973-234-4690

Bunch of left over parts and parts from a car I parted out. All prices do NOT include shipping!I have a 20g turbo externally gated. Can sell manifold turbos and precision 39mm wastegate with dump pipe all together - $600. 2 tial 38mm wastegates silver. Minor cosmetic scratches perfect...

Hello, I have an ACT 2600 pressure plate with a 6 puck sprung disc. Also have a Xact Streetlite Flywheel. These are all for an AWD Six bolt. Ran for 2,000 miles, two track days. Replacing because I wanted to try out a new setup that didn't give me a body builders left leg. Pressure plate and...

So I recently pulled the motor and transmission out of my 95 eagle talon tsi fwd, and I got the motor and the transmission back together got everything redone.. and now I have an issue, at first I noticed my wheels didn’t lock up while in first gear, while I was standing on the wheel to get a...

I'm about to throw in the towel. I have a 98 gst that I am installing a 6 bolt block/ 2g head into. I did the timing outside the car and everything spun perfectly. Today after having the motor and trans installed I began to fill with coolant as a last step prior to attempting startup and I...

I know it may be a stupid question, but I have no idea :) So I have an EUDM Eclipse GSi (the one with the N/A 4g63) I put a turbo on it and now the oem clutch can't hold the performance. I'm planning on changing the clutch but I don't know if I need to change the flywheel. If I buy a clutch kit...

Hi all, when it is in Second, Fourth or Reverse gear it has that space, didnt have it until a moment ago? Got a video:You must be registered to see element.

Hi DSM anyone have heard the replacement part of a fidanza 161151 flywheel or a good condition flywheel gst please pm

Hey all, I'm having some starter engagement issues and could use some advice to best solve it.Scenario: I turn the key over and sometimes nothing happens, other times it turns over fine and starts. I just got to keep turning it and turning it until it decides to start. Sometimes I have to turn...

$340 SHIPPED! OMG! Brand new Southbend SS/TZ/B clutch kit dual friction kevlar/ceramic clutch kit. For street and track use. For AWD or FWD 5-speed DSM. 90-99. My upgrade from an ACT 2600. Awesome clutch bought from Tim Zimmer for $525 plus shipping this past year. Car sold. $340 SHIPPED text...