reched
Probationary Member
- 4
- 1
- Apr 14, 2025
-
norway,
Europe
Hi all!
I have upgraded the turbo to evo3 big 16g on my 1998 eclipse gsx. Other than front mount intercooler the rest is stock.
Since there is no way of tuning the stock 98 ECU I have bought a used 95/96 ECU which is converted to 98 with ECMLink.
Stock ECU: MD346676
ECMlink ECU: MD312464.
The car runs fine on the stock ECU however with the ECMLink ECU it wont start and backfires a lot.
Probably because all the values are programmed to a different Eclipse. (the guy i bought it from had a very tuned 98 gst)
I need to find a base tune so i can start it and drive to the dyno tuner.
I've read on the forum that there is an option to reset to default But this would probably reset to a 95/96 base tune. I am completley new to ECMLink, trying to figure things out.
Really appreciate all help and comments.
I have upgraded the turbo to evo3 big 16g on my 1998 eclipse gsx. Other than front mount intercooler the rest is stock.
Since there is no way of tuning the stock 98 ECU I have bought a used 95/96 ECU which is converted to 98 with ECMLink.
Stock ECU: MD346676
ECMlink ECU: MD312464.
The car runs fine on the stock ECU however with the ECMLink ECU it wont start and backfires a lot.
Probably because all the values are programmed to a different Eclipse. (the guy i bought it from had a very tuned 98 gst)
I need to find a base tune so i can start it and drive to the dyno tuner.
I've read on the forum that there is an option to reset to default But this would probably reset to a 95/96 base tune. I am completley new to ECMLink, trying to figure things out.
Really appreciate all help and comments.
