ItsTwan309 said:

Thanks brother, It just has the Megan mid pipe. Its a resonator.
That dash trim is awesome! Did you create that file and print it?


I have some wiring planned for the winter. Basically remove wires from the engine bay that are no longer needed, consolidate branches, and get rid of all the wiring under the radiator. I want to branch them cleaner. My bay has a birdnest on the passenger side and is such an eye sore

Click to expand...

Not at all I find it on eBay there's a company that makes them



They also have the 3 pods as well

3 Pod would be sweet! I think I want to tray and build oil, coolant into my factory dash first now. I have seen a couple on tuners and a buddy of mine has his done that way

Had to bench test the glow shift harness to make sure the sensor ran on a 5v reference. Made a new connector at EGR wiring, wired fuel pressure into the ecu. need to set parameters tonight and take it out for a rip.

Filled up my Transmission!



The Schaeffer’s arrived with a quart of Red Heavyweight Shockproof as well for the Transfercase

Spent $120 on Tial wastegate springs....holy these things have gone up in price.

ItsTwan309 said:

3 Pod would be sweet! I think I want to tray and build oil, coolant into my factory dash first now. I have seen a couple on tuners and a buddy of mine has his done that way

Click to expand...

That's the 3 pods trim

1cleangsx said:

Filled up my Transmission!

You must be logged in to view this image or video.

The Schaeffer’s arrived with a quart of Red Heavyweight Shockproof as well for the Transfercase

You must be logged in to view this image or video.

Click to expand...

Beautiful work

jdxnc said:

Spent $120 on Tial wastegate springs....holy these things have gone up in price.

Click to expand...

How many springs did you buy?

Alignment time

Little bit of an update...little bit of a vent. Im working on trying to figure out/troubleshoot why my A/C fan won't kick on and why the A/C compressor isnt engaging still. I suspect its either the ACCU, thermo sensor, pressure sensor or the Ohm harness (which is unfortunately at the high end of the list due to my previous issues with it).

Is OHM Racing a one or two person business? If so then I can partially excuse their bad customer service, more like lack thereof, but geez man they KILL me with it sometimes. Especially when I try to reach out across multiple platforms to try anything that works best for them and nothing. No follow up, no re-directing, nothing. Just a seen message left high and dry. And this has been from start to current with them. Ever since I even inquired about the harness. And if they ever check around through the community it seems that their reputation for bad customer service, not responding, and being hard to reach is pretty well established.

Sorry for the long rant but I need some reasoning on this seemingly unwarranted frustration. For the money they have people spend and the products they offer, I just expect more and thats not just more from the customer service stand point but knowledge on the harnesses they are re-creating and custom building because I've asked questions of them that they couldn't answer and that will make anyone nervous because then you question what else they may not know about a harness beyond its wiring diagram

cswindel said:

Little bit of an update...little bit of a vent. Im working on trying to figure out/troubleshoot why my A/C fan won't kick on and why the A/C compressor isnt engaging still. I suspect its either the ACCU, thermo sensor, pressure sensor or the Ohm harness (which is unfortunately at the high end of the list due to my previous issues with it).

Is OHM Racing a one or two person business? If so then I can partially excuse their bad customer service, more like lack thereof, but geez man they KILL me with it sometimes. Especially when I try to reach out across multiple platforms to try anything that works best for them and nothing. No follow up, no re-directing, nothing. Just a seen message left high and dry. And this has been from start to current with them. Ever since I even inquired about the harness. And if they ever check around through the community it seems that their reputation for bad customer service, not responding, and being hard to reach is pretty well established.

Sorry for the long rant but I need some reasoning on this seemingly unwarranted frustration. For the money they have people spend and the products they offer, I just expect more and thats not just more from the customer service stand point but knowledge on the harnesses they are re-creating and custom building because I've asked questions of them that they couldn't answer and that will make anyone nervous because then you question what else they may not know about a harness beyond its wiring diagram

Click to expand...

Man that sucks. I have been thinking about using them, but I almost rather learn through it an build my own

babyviper said:

How many springs did you buy?

Click to expand...

8(2 gates)

I was thinking about the Ohm harness for my car when I clean up the engine bay this winter but I've seen a few reports of them not being all that great on here. Might just go back to the plan of building my own harness again like in the VW shaved bay days.

Modified an eBay header... So now it's four twoooooo one... Instead of 4-2-1..

That's one way to keep the engine from rocking when the mounts get mushy.

Don't get me wrong, OHM quality is pretty darn good its just in my case I had some issues with the harness itself that I just can't overlook. Take my gripes and complaints with a grain of salt, I'm not out here to tarnish names but I just needed to vent a bit that's all.

But at the end of the day, and like I'll always say, this community gets me through my problems and is a huge reason why I love owning the car. The DSM community is something special and i'll always be grateful for the people because it got me through tearing this car apart, putting it together and getting it back on the road.

steve said:

That's one way to keep the engine from rocking when the mounts get mushy.

Click to expand...

I have solid steel bushings all the way round from Boosted Fabrication, the tubular subframe and aluminum subframe bushings. Poly in the control arms, coilovers front strut bar and a Few other goodies... I call him Woogie...

Here is 20 minutes of marinating the carpet in water and cleaner. Foul. I'll keep going until the water is clean in the kiddie pool.

"improved" the front end links from normal to stupid. Yee :]





Random question what do you think of the "brushed steel" look ?

1cleangsx said:

Filled up my Transmission!

You must be logged in to view this image or video.

The Schaeffer’s arrived with a quart of Red Heavyweight Shockproof as well for the Transfercase

You must be logged in to view this image or video.

Click to expand...

Beautiful

Dannyrampage1 said:

You must be logged in to view this image or video.

That's the 3 pods trim


Beautiful work

Click to expand...

Yes

Has anyone replaced these foam filters before?

Istalled wipe motor wont need, cowl and mocked up the downpipe to fit the morrison fabrications pipe i got last year.

Finally got’er buttoned up First start up on the auto tomorrow Wish me luck

You got this

Stapl3 said:

Has anyone replaced these foam filters before?

Click to expand...

I have. I did a complete restoration of all the HVAC boxes behind the dash. They're not really filters, just foam that seals up the doors. I assume yours have turned to dust like mine had? I don't have a write up on it but I took a bunch of photos and I can tell you how I did it.

Stapl3 said:

Has anyone replaced these foam filters before?

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Click to expand...

I guess it should not be difficult to get a replacement foam filter maybe not Mitsubishi OEM but something similar like maybe Lowe's or home Depot and just cut it