The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Wiper Arm Question

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Flash

20+ Year Contributor
3,359
14
Nov 30, 2003
Highlands Ranch, Colorado
Well, my car's wiper arm's are starting to look well... not like new. How do I take them off? I heard they pull straight out, I just want to check before I go break something. So do they pull straight out? If not, how do they come out?
 
you are correct - remove the 10mm bolt under the plastic cover and pull straight off.
 
Is your plan to repaint them? If so, you can leave them on. Take the wiper blade off. Get some newspapers and poke the wiper arm through it. Lay the wiper arm back down with the newspaper under it and spray away. The newspaper will keep the paint off the glass and cowl.
 
AWDPetmitsus' method would work well if you were brushing the paint on. Unless you cover the entire car, you will get all sorts of overspray.

Take the arm off and do it right. If you take it off you can also get to all the spots that you wouldn't be able to if it was left on.
 
Meguiar's used to make this stuff called "Back to Black" that I used on my wipers and window trim. If they still make it, stock up. Leave the wipers on the car, dab a bit on a rag (dont use a fluffy towel, the lint will stick horribly) and wipe on.

:dsm:
 
Omega said:
Isn't the back to black for vynal/plastic parts?


Supposedly, but it works better on wipers than spray paint. Just has to be reapplied like twice a year or so.

:dsm:
 
wastefuldreamer said:
1 bolt, Take it off and pull, Then spray paint the arms. Its not that hard.


You forgot "wd-40 the rusty ass bolt, get bitched at by wife for painting the sidewalk, and buy paint thinner to get wind-blown overspray off hands." Just trying to help. :D
 
Randomrage said:
You forgot "wd-40 the rusty ass bolt, get bitched at by wife for painting the sidewalk, and buy paint thinner to get wind-blown overspray off hands." Just trying to help. :D
i guess some of us have more than DSM in common :p
 
Well I couldn't get the wipers off so I covered half my car with newspaper, and built a mini paintbooth around each wiper with carboard. Now, there is no over spray and my wipers look like new!
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 4G63 3 inch Magnaflow SS high flow cat
    3 inch Magnaflow stainless cat. High flow. 18.25 inches. Flange holes are 4 1/8 center. Has...
    • Galant665
    • Updated:
  • For sale 4G63 Forge Motorsports BOV
    Original Forge Motorsports bov. Adjustable with over 80 clicks on the dial. Nice to use for...
    • Galant665
    • Updated:
  • Wanted 1g 1991 Black Cherry Eagle Talon
    5-speed
    • bamatalon
    • Updated:
    • Expires
  • For sale Misc Left Over Parts
    Hello, I have a few left over parts for sale, these do not include shipping, please pm me for a...
    • r3dmak
    • Updated:
    • Expires
  • For sale Alpha Injection Clinic 2200cc for 4G63 DSM/EVO
    I have a set of Alpha Injection Clinic 2200cc high z injectors for DSM/EVO. I am stepping up to...
    • spoolinpos
    • Updated:
    • Expires
Back
Top