Windshield stickers

[Justin Lauscher]

Hey guys, I've been wanting something for the bottom of my front windshield, do far I've thought of these, anyone have any other suggestions? But instead of the black lettering, white.

 

[chiefvest]

My 99 GS had a white banner at the bottom of the windshield that said #ratchet. I would suggest putting it at the top because the bottom location is hard to see from the exterior. Half my banner seemed hidden

 

[91-GS]

Check your laws before putting anything big on the windshield. A windshield has a small mark, usually letter 'A' with an arrow pointing at a line, that marks the lowest you can put something and still be legal. At least that is the case in some places. With that in mind you can even black out that top area to keep sun out, would be like having sun visors down all the time.

 

[ROGUE DSM]

The design looks great

 

[Justin Lauscher]

The only real thing cops don't like around here is tinted side Windows. Other than that you could dam there get away with murder!

 

[99 OZ Edition]

I used to run a windshield sticker. Had to remove the windshield wipers for it to look passable and got alot of negative attention from police. I would advise against them. Sometimes less is better.

 

[totaleclipse_05]

Check your laws before putting anything big on the windshield. A windshield has a small mark, usually letter 'A' with an arrow pointing at a line, that marks the lowest you can put something and still be legal. At least that is the case in some places.

This is good advice. Even if the local cops in your area aren't too worried about sticker placement, it could give a state patrol/sheriff/etc a reason to pull you over and cite you for it or even other violations (tint, exhaust, etc). Your car so it's up to you!

 

[waterlance]

Someone on IG had a spyder that said 'financial mistake' in the spot your talking about. Looked alright too

 

[Justin Lauscher]

Okay guys, only took forever but I had it made. It's 35x6 and has a 1/4" white outline around it, I'm deciding to put it across the top. I just wanted to show you guys how it turned out!