What did you do to your DSM today?

[Bud92gsx]

I aired up the front tires and registered the car recently.
The cops were harassing me about not being registered on private property.

 

[1990TSIAWDTALON]

That's why I have a FARM (of cars). No harassing thank goodness.
Tuning on car currently. 2150's can be a little tricky with just gasoline, set the global and got busy only to find out during cruise tune that I go over 100 on the VE table so I will start over again tonight (after the dang heat gets out of the shop and after I get off of work). Link suggested -80 global and sounded good and idle tune came in with STFT's at +-5% so I was happy. Going to go with some 70's for global and start over so I stay out of the over 100 club. I will say that the VE table was still happy with 125 in a cell and over 100 in a few others but it isn't correct to do it that way so I will play with the tune again. Trying to get to a WOT log but not in a big hurry with my new motor, which is so far so good.
I would rather be tuning E85 but the supplier is still dry......

 

[Lancer_lover]

Been trying to change interior Light and going mad on The cig lighter and The other next to it The other working fine but if u change to a new one then no one is working

 

[BLACK'98DSM]

After: 4 quarts of fluid, 3 pumps, 3 belts, and many man hours

I have properly bled my power steering and have a very smooth and semi quiet car.

 

[Chicken Patty]

I did nothing to my DSM today because I sold mine a while back. But... but....... the withdrawals are real, and I and hunting for one Hopefully will be able to contribute to this thread again, soon

 

[b00st3d]

Took a picture of it in the garage.

You must be logged in to view this image or video.

 

[b00st3d]

Brought it to the shop so we could build the new exhaust.

You must be logged in to view this image or video.

 

[b00st3d]

Building stainless exhaust is always fun!

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[b00st3d]

Vband everything.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[curt-s]

Kinda sick of the laptop and I was itching to do something over the winter so I opted to do ecmlink on a raspberry pi 4b with 7" touchscreen lcd. I dont think the double din will cut it so I plan on using a small articulating arm purchased from ebay for $10.
We will see how it goes.. link runs, just need to see if it interfaces with the ecu. The power of the 4b definitely should help given the 3's apparent lagginess.
The 1024x600 screen isnt far off from the laptop i was using anyway and a bluetooth mini keyboard will be nice if i dont want to use onscreen with a stylus.

For those that are wondering, logs will probably be uploaded automatically once im in range of my house over wireless (locked down guest network with no access to net or internal assets except designated dump spot) and will also be saved to a microsd card in a remote mounted usb-microsd adapter.

 

[Lancer_lover]

Bought new rims and they are Lighter to e225 45 17

 

[210 dsm]

Bought new rims and they are Lighter to e225 45 17

 

[210 dsm]

Today I secured my vacation time at my job so I can attend the 28th annual DSM shootout. I got 9 days off. Im super stoked about finally being able to go. Technically did nothing to the car, so I now im not playing by the rules here, but what can I say I'm a rebel.

 

[RWD4G63]

Today I test fit some wheels and tried to push it into the garage but my brakes are so rusty it doesn't want to move

 

[Bud92gsx]

Shoveled sum.snow away from it. Guess it might be time to start getting it ready for a new home.

 

[DavidJamesDSM]

Replaced my leaking clutch slave cylinder and poked around adjusting to my tune. Damn fuel trims

 

[RWD4G63]

This:

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[spoolinpos]

Wrapped up the Vamos 2g fuel cell install and ventilation system. Wish I could say it was a fun install, but not having much room to work with makes for quite a time! I would think dropping the sub frame will make things easier, which I decided not to do.

 

[Techn0Nut1996]

Let it run for a while to keep the battery alive while it’s in hibernation. Boy am I itching to drive it again..

 

[Evolving_sti]

Installed my carbon fiber door sills. And took some pics of brother and sister

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[AWD-Tony]

2nd time solder test to shim the transmission on the kitchen floor. Once, maybe twice more, then order new shims.

You must be logged in to view this image or video.

 

[1990TSIAWDTALON]

My wife would HAVE A FIT.........a transmission on the kitchen floor.
THATS WHY I GOT RID OF HER........

 

[ishnish]

Went outside this morning before work, kissed the hood and whispered to her "Happy Valentine's Day Lucy". Shortly after, wished my gf the same

 

[AWD-Tony]

My wife would HAVE A FIT.........a transmission on the kitchen floor.
THATS WHY I GOT RID OF HER........

That's funny. I'm lucky. My wife hates the car but she basically lets me do whatever. Only if she loved the car as much as I do.

 

[ishnish]

That's funny. I'm lucky. My wife hates the car but she basically lets me do whatever. Only if she loved the car as much as I do.

I feel you on that. Can't blame her though because every time I drive the damn thing I always complain about things that need to be sorted with the car . So once it's running perfect and quick, she'll be a believer. Otherwise she just thinks I spend more money on Lucy than her and she'd be correct!