Well I decided on my turbo,but should I go Internal or External WG?

[Spoolin95DSM]

After changing my mind several hundred times on which turbo to get for my car ive finally have come to the decision that im going with the G50 from SBR My only problem now is deciding weather to go Internal or External Wastegated.SBRs G50 uses the PTE housing so its not supposed to creep,but should I go external anyways

 

[Spoolin95DSM]

One other question with my new 50trim should I go with 650 injectors,or would 750 be a better choice?

 

[Mindslayer]

External is the best wastegate if you have the money. 750cc with a good tuning you'll never go wrong if you want 400+whp.

 

[Spoolin95DSM]

One other question..Will a DNP exhaust manifold fit with the 50trim?

 

[Tallen]

An internal wastegate on the 50trim si fine, they are badass.

750cc...dont buy injectors again.

It will fit the DNP manifold

Extremepsi.com has better prices...$850 shipped...
http://www.extremepsi.com/store/customer/product.php?productid=16454&cat=0&page=1

 

[L2RTSiAWD]

How much boost do you plan on running?

 

[Spoolin95DSM]

the most maybe 20 psi but probably 18 often

 

[98talonAWD]

650cc... you wont even come close to full duty cycle on those at only 18psi on a 50 trim.

 

[DSMNightmare]

If you plan on only running 18-20psi the internal gate is plenty. THere are guys making 400+ hp with internal gates.

 

[PokinatchaPunk]

I was also thinking about going with a 50trim from extremepsi...just for info How much psi will the internal handle "safely"?