Valve cover vented and catch can.. please advise..

[mizak82]

This is not a good set up, please help me in making it optimal..

The pic below is my catch can and the other is of a 3/4 inch airfilter on my valve cover..

Weird the pic keeps posting upside down when I open the file it is right side up.. damn Iphones..

 

[92AWDHX40]

Please describe problem, and your optimal idea you have in mind Please?

 

[mizak82]

Well that breather filter spits out oil, not a lot but enough to bother me.. the two holes are plugged in the intake and my BOV is rerouted to the throttle body (not seen in pic).. idles fine for the most part but some times lean readings on my wideband and low idle.. Is that the way they should be routed?

 

[92AWDHX40]

I had a breather but spits out oil, not sure on that one mine didnt spit anything a clearer picture would help.

 

[zonerdck]

It seems like given your situation the best thing to do would be to read this thread (PCV System Discussion) and decide which route you want to take. There are a lot of different options.

 

[Aproductions]

Go from the VC to the catch can then catch can to the intake.

OR

Go from the pcv to the catch can then catch can to IM

 

[90dsmboy]

You can always switch to a vented catch can. Then both ends of valve cover can go to can.