ECMlink tuning issues

[Pat026]

issues with tuning. I don't know how to go about it. please don't hate since I'm a newb. however I set I the ecmlink I have 550cc injectors a 16g turbo walboro 255, aem fpr and a gm maft. now when i installed the ecm link i left everything at zero except the fuel deadtime which i have set for the 550cc's and changed the settings to the gm 3". I started the car and the idle goes wayyy up then it cuts out my timing went from 5 degrees on the datalog to 61.2, then 31 then bounced at different degrees then it stalled. I don't have any idea what's goin on. any solutions?

 

[EGLTAWLN]

Are you still running a MAF-T setup or did you get the special GM MAF cable that ecmlink uses?

 

[FIBA M - EC17PSE]

Why have you started 2 threads for the same question? Was you needn't help faster or something? This is not how it's done, please learn this for future posts and sometimes it does take time for replys,

Have you watched all ecmlinks videos yet? If not then go to ecmlinks site and watch them ALL!!!

 

[Pat026]

i have some kind of adapter cable that goes from the maft to the stock harness not sure if it's ecmlink's. it came with the car when I bought it. and sorry for the multiple threads it's in I trying to tune it I just want it to run right

I watched the videos I set the deadtime, set it to gm maft. I left the tables at zero.

 

[doubleclutch]

First of all, you need to fill out this:

http://www.dsmtuners.com/threads/wa...r-receive-no-replies-from-the-wisemen.443297/

Second, create a profile for your car.

Third, post a log so we can see what the heck is going on.

"left the tables at zero" doesn't mean much unless we can see what you are talking about.