TPS: logger = 99.6% SAFCII = 100%

[BIGGSIE]

So at WOT my logger shows 99.6% and my SAFCII shows 100%.
I've done a search and found out that at the closed position it should be 10% (on the loggerbut) but is it ok for it to not reach 100% at WOT?
I can adjust it all I want but can't get any more than 99.6% on the logger. I'm pretty sure that the ecu doesn't need to see full 100% but can anyone verify this?

 

[TalonTSi-AWD91]

It's fine, mine does the same thing.

 

[scottr126]

Ya mine reads 99.6 to but 100 on the AFC, good to know that its normal.

 

[myblack98gst]

the AFC will make its 0% and 100% off of the min and max voltages it sees. I adjusted my TP to make up for not having a ISC. and when I did it the AFC showed 1% throttle when i shut it off and turned it back on it showed 0%. but my logger still shows 1%

 

[Scrymerr]

Originally posted by myblack98gst
the AFC will make its 0% and 100% off of the min and max voltages it sees. I adjusted my TP to make up for not having a ISC. and when I did it the AFC showed 1% throttle when i shut it off and turned it back on it showed 0%. but my logger still shows 1%

no ISC? how?