The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

ECMlink Timing issue

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Turbo_moe

Probationary Member
1
0
Jan 12, 2026
Detroit, Michigan
So what’s up guys? I have a 1995 Mitsubishi Eclipse GSX and out of nowhere, my timing has started to be weird. At idle, I’m at 22-21° and that full boost or starting to boost it starts going down. By 4500 RPM it’s bugging out and I’m at seven or 6° on timing with no not retard for most of the time.

I have a 6 foot block, 2G head with cams, S 90 throttle body, Magnus intake, FIC 650 injectors with ECMLink. I'm also using a 1g CAS and only seems to be drivable when on full advance, getting random ldle surge also. Any ideas? It ran good for a few days after fresh build, then boom outa nowhere one morning.

I did a boost leak test, no leaks ,

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
Last edited by a moderator:
Zero out the Fuel Adjustment Table, take timing out of the car above 1.0 Load Factor until you get your fueling in check and you are most definitely going to want to start over on that VE table because there is no situation where that table would be correct.. Build a VE table that makes sense and adjust your global fuel accordingly.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top