t-25 water/oil lines match with a bastard 20g?

[niddydsm]

so I finally blew my t-25. Not that its a good thing but now i have a reason to upgrade it without the wife complaining. I was looking at getting the bastard 20g. I would like to know if i can use my stock oil/water lines on the 20g or if i would have to get different lines.

 

[bryanwheat]

The water lines can be used with a little modification. The oil supply line will have to be upgraded. The oil return can be slotted to work, but i recommend buying a new one because old return lines are prone to cracking. You will also have to get a j pipe and modify the lower intercooler pipe a bit.

 

[niddydsm]

what do u mean by "slotted"?

 

[bryanwheat]

what do u mean by "slotted"?

The holes in the turbo where the return line bolts to the garret t25 turbo are spaced differently so the 2g return line won't bolt to the mitsubishi tdo5 turbo. You can just elongate the holes a bit and it will bolt right up.

 

[niddydsm]

good thing to know. Im gonna go ahead and pick the return line, j pipe, and pick up a ss feed line. Thanks dude that helped out alot. I totally spaced that it was a garret and not a mits. thnks

 

[bryanwheat]

good thing to know. Im gonna go ahead and pick the return line, j pipe, and pick up a ss feed line. Thanks dude that helped out alot. I totally spaced that it was a garret and not a mits. thnks

Make sure that you get a 1g style return line.

 

[niddydsm]

do i need to get a oil ristrictor if i feed it from the head?

 

[bryanwheat]

do i need to get a oil ristrictor if i feed it from the head?

No. I would just use the stock 1g oil supply line and banjo bolts.