General Speeduino 510cc yellow top injector deadtimes and voltage chart?

[Alex40823]

I have 510cc yellow top injectors installed and I'm readying up to get to the tuning phase and I was wondering if any of ya'll use Tunerstudio and have the Injector characteristics settings for these injectors, especially on the injector voltage correction chart and Injector timing?

This is my first time getting a stand alone ECU and any help, tips and tricks is greatly appreciated.
Currently using a UA4C Speeduino board and Tunerstudio for the software.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[Justin DuBois]

I found this:

https://www.dsmtuners.com/threads/510cc-injector-voltage-chart.514536/post-153668098

Justin

 

[curt-s]

Just keep in mind that the numbers Justin posted are for ecmlink. Any other "stand alone" may introduce additional timing delays (positive or negative), but these should at least get it started if the alternative ECU isn't too far off the mark.

I never knew there was an Arduino-based ECU alternative.. never looked into it. Now I'm really curious, I've done a lot of Arduino programming in the past, this could spell disaster

 

[Alex40823]

Hey Justin, thanks for the reply. I already saw that post for the 510cc, but I was wondering how I would input those values to Tunerstudio. Since Tunerstudio has Injector % for the vertical axis and Voltage for the horizontal axis. That's where I dont know what to do next

also you guys wouldn't happen to know the injector close angle chart?

 

[Alex40823]

I currently have these settings for the 510cc injectors but I'm not sure if they're the right settings for it, if any of you guys know. please let me know.

You must be logged in to view this image or video.

 

[Justin DuBois]

Have you asked on this forum?

Index page - Speeduino

speeduino.com

 

[steve]

I don't know what the units are but they don't look like the factory injector deadtime by voltage that from DSMPT that Justin referenced.

 

[Alex40823]

Have you asked on this forum?

Index page - Speeduino

speeduino.com

no luck on the speedo forum too. It seems like there's not a lot if info on these 510cc injectors

 

[Justin DuBois]

I wish I knew more - that's a fiendishly dangerous idea.