The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Sourcing Ignition Parts

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Smedleybutler

Probationary Member
16
6
Jan 3, 2025
Carrollton, Texas
I'm in the market for an oe ignition control module and coil pack.
There are so many coil packs available on rock auto I don't know which to pick 😩😩
The module only has two available, does anyone have any experience with these?

You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
If you looking for oem parts, the coil packs can be sourced from 3000gt and power unit can be bought separately and mounted on the existing bracket. Can't say anything about rockauto parts as they are mostly aftermarket.
 
I'm also new to this particular 1992 eagle auto gsx, it's not the car on my build sheet, I got another 🤣
It began misfiring and when I started looking around I found that module just hanging there, no bracket at all.
Again from what I gather it's likely overheated and bad?
The coil pack I was going to do it if the ICM doesn't fix it.
Does that sound good?
I would also like to know more about these icms, like why's there so few manus for them and are they going away???
 
@We're on Boost - care to share your experience here?

Thread for reference.

Yes, I installed mine in 2022 and it's been perfect. (the power transistor or ICM)
Since mine was for a 1990, it is the Standard Motor Products LX646, just as Rock Auto shows it for the 1990, and that's where I bought it from.
In post #1 here, the OP shows the equivalent part for the 1992 (LX728). It looks correct and it looks just like mine except for part numbers of course, with different number of pins and so-forth like you would expect for the ones later than 1990.
That's the one I would buy for the 1992, if it was me.

I will add that I'm giving my new power transistor an easy life - relocated to inside the cabin, which you will remember, and the thread for that is here.

In the thread you referenced Brian, I also show the NGK coil pack that I bought at about the same time, and I haven't put that one on the car yet. It's just lying around in the house as a spare. My old coils are still working fine. And it looks to me like the NGK coil packs are not available anymore anyway.
 
Again from what I gather it's likely overheated
When mine started going bad, the car would quit running. I could let it sit for 15 minutes or so and then it would restart and then I could drive it for a few minutes to get home. So I have to think that high temps are part of it. When it's this type of failure, I think the unit would bench test just fine, because you'd most likely be bench testing it after it has cooled off. So I never even bothered to bench test mine.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top