Resolved Something missing on throttle body?

[travisgoldkuhl]

Looks like i have something missing here, any ideas?

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[Archer Fabrications]

Throttle stop, if thats a 1g tb there is a tps sensor there.

 

[snowborder714]

It's a 2g throttle body. You can tell by the small threaded hole at the bottom of the throttle cable bracket. And the 1g's had an idle switch in that area, not a TPS sensor.

SAS screw.
http://www.dsmtuners.com/forums/newbie-forum/428000-tps-adjustment-without-stop-screw.html

 

[travisgoldkuhl]

Ok thanks, there aren't any threads in the hole so i will have to tap it. Hopefully they weren't just stripped out of it.

 

[luv2rallye]

http://www.dsmtuners.com/forums/attachment.php?attachmentid=137053&d=1333518852

 

[jed344]

if its on a 1g and you have ecm link you can simulate idle switch thats what im doing anyway.

 

[travisgoldkuhl]

Its on a 2g but im going to be putting on a evo III intake with a 1g tb thats been machined to a 63mm this weekend