Red Demon - Quickest & Fastest 4 Cylinder AWD & H-Pattern Manual Trans - 7.46 @ 199.9MPH

[Boostin Performance]

Over the Memorial Day Weekend, we took the Red Demon out for some testing on the new Methanol Injection and 83mm Turbocharger setup. After putting down over 1300WHP on our Mustang Dyno, we were itching to see her fly down the track!

We're thrilled to announce that the Red Demon captured (2) records over the weekend.......
World's Quickest & Fastest 4 Cylinder AWD and Quickest & Fastest H-Pattern Manual Trans!! [email protected]!

You must be logged in to view this image or video.

First Pass - 7.55 @ 195.9 MPH

You must be logged in to view this image or video.

They say records are made to be broken... so we broke our own and backed it up with an 7.4 at almost 200mph!!!
7.46 @ 199.9 MPH

You must be logged in to view this image or video.

The Red Demon was not at full power for these passes, as we just switched fuels and are still collecting data on the Haltech Elite 2500. We expect to go quicker and faster, so stay tuned!!


Visit our website where you can purchase many of the EXACT SAME PARTS used on the Red Demon!

ENGINE:
(*) Boostin Performance Red Demon Spec Short Block -
http://shop.boostinperformance.com/product-p/bp-reddemonsb-dsm-short-block.htm
(*) Boostin Performance Stage 3 Cylinder Head w/ Custom Kelford Cams
(*) Boostin Performance 1/2" L19 Head Stud/Insert Kit w/ Custom Copper Head Gasket
(*) Magnus Motorsports V3 Bad Ass Intake Manifold
(*) Straightline Performance / Turbo Joe Custom Exhaust Manifold

DRIVETRAIN:
(*) ShepTrans / PPG 4-Speed H-Pattern DogBox Transmission
(*) Boostin Performance 300M Upgraded Transfer Case & 300M Transmission Output Shaft
(*) Quarter Master Custom Triple Disc "Drag Clutch" (available exclusively thru Boostin - will be on our website soon)
(*) Driveshaft Shop HD Driveshaft & Stage 5 Axles

CHASSIS / SUSPENSION:
(*) Magnus Rear Sub-frame Modified for 3000GT Rear End / Sway Bar
(*) Custom Tubular Front Sub-frame
(*) KYB Struts w/ Custom Springs
(*) TMZ Performance Rear Brake Kit
(*) STMtuned.com Front Brake Kit
(*) Volk TE37's w/ 26" Slicks

INDUCTION / TURBO:
(*) Precision Turbo & Engine 8385mm Turbocharger
(*) Precision Turbo & Engine 64mm BOV
(*) Boostin Performance 3.5" Custom Upper Intercooler Pipe ( Vibrant Performance Materials)
(*) Extreme Turbo Systems 6" FMIC
(*) K-Tuned 90mm Throttle Body

FUEL SYSTEM / ENGINE MANAGEMENT / IGNITION:
(*) Sparktech Ignitions DSM Drag II Ignition System
(*) Haltech ECU Elite 2500
(*) Kiggly Racing 12 tooth crank trigger
(*) 4 Fuel Injector Clinic 2150cc Injectors
(*) 4 Precision 5000cc Injectors
(*) Aeromotive Mechanical Fuel Pump
(*) VP M5 Methanol
(*) Custom 2 Gallon Fuel Cell Behind Passenger Side Headlight

EXTERIOR:
(*) Angry Aero 2G Bumper Shutters, Mirror Deletes & Custom Front Lip
(*) X-treme Graphics & Lettering Decals


1307 WHP / 844 WTQ
Solid Line = New Setup
Dotted Line = Previous Setup (ET of 7.78)

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[DSMReviver]

Congrats!

 

[Black95TSIawd]

Nothing less than amazing.

 

[kiggly]

Very impressed, and great to see the DSM platform being pushed to higher levels after all these years. We're honored to be a part of this build.

 

[GST with PSI]

(*) Driveshaft Shop HD Driveshaft & Stage 5 Axles
(*) Magnus Rear Sub-frame Modified for 3000GT Rear End / Sway Bar

Are you guys using a 1 piece driveshaft with the 3KGT rear?

 

[DSMReviver]

Very impressed, and great to see the DSM platform being pushed to higher levels after all these years. We're honored to be a part of this build.

Kiggly, when can we see you in 7's?

 

[gst-turbo]

Nice

 

[eviltsi]

So bad ass... congrats again!!!

 

[Boostin Performance]

Very impressed, and great to see the DSM platform being pushed to higher levels after all these years. We're honored to be a part of this build.

Glad to have you a part of the build too!
Thanks everyone for your comments and support!! The season has just started, so expect to see a lot more from the Red Demon

Are you guys using a 1 piece driveshaft with the 3KGT rear?

Yes, its DriveShaft Shop's Heavy Duty Alum drive shaft. It's a single piece.

 

[familyMAN]

Great work. And it looks like a show car too!

 

[Boostin Performance]

Getting ready for Chitown's King of the Streets (KOTS) at Great Lakes Dragaway (GLD) this weekend!
Hope to see everyone there.

You must be logged in to view this image or video.

 

[Boostin Performance]

Wanted to send a big "THANK YOU" to everyone that stopped by our tent to say "Hi," check out the Red Demon, congratulate us on the record, and cheer us on at Chitown's King of the Streets KOTS (KOTS) this past Saturday. It was a hot one, and we appreciated everyone sticking thru the heat to enjoy the show at Great Lakes Dragaway (GLD) ...cuz there were so many bada$$ races!

We couldn't be happier with how the Red Demon performed; going a couple of rounds before being eliminated. We love seeing the growth of this event year after year, and the support the crowd gives all of the racers. We'll see everyone again in September for the Fall KOTS!

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[Boostin Performance]

New video of the Red Demon, featuring a slow motion 1.22 60ft launch.

You must be logged in to view this image or video.

 

[Boostin Performance]

Video of the Red Demon capturing the 4-cylinder AWD MPH Record!

You must be logged in to view this image or video.