rebuilt head now wont start

[supersmasher]

just rebuilt the head and now it wont start.. it blows white smoke from the intake. its got spark and gas. not sure what it could be

 

[ptownracer]

ive recently done a head job and had the same problem sounds like the timing, check it again make sure it didnt miss by a tooth or two, if the problem still continues try adjusting your CAS or cam angle sensor good luck



p_townracer

 

[jenglish1984]

Sounds like an adjustment on the CAS needs to be done.

 

[fwdmaster]

Did you set ignition timing back to 5 degrees with the timing light

 

[supersmasher]

so i just ahd the timing way out. its good now


thanks for the help