Rear motor mount not lining up

[stagen]

Well I managed to get the motor put in but I can bolt up all but the rear mount. The bracket that attatches to the motor is putting its hole about 1/2 inch farther back than th mount is. I read somewhere that fwd and awd had differient brackets. If somone with CAPS could search to find out what I have for brackets that'd be great. The front bracket number is 347 and the rear is 194. Or if you happen to have a 1g awd could you tell me the number on the rear bracket is.
And if it turns out that I need a different bracket could I get away with drilling te new hole in the bracket I already have?

 

[Absinthminded]

If you have the correct mounts/ brackets, you can try to loosen the other mounts to give your self a little slack to work with. I used a prybar in the right spot to adjust its attitude and that worked great.

 

[stagen]

Well I "adjusted its attitude" and it worked. Motor is officialy bolted down.