rear cf lip installed

[gofer]

heres the install of the group buy rear cf lip from this thread
http://www.dsmtuners.com/forums/vendor-announcements/346785-rear-lip-group-buy-pics-contact-info.html#post151963511
what i thought it was going to look like...

You must be logged in to view this image or video.

below are the pics. believe me, i am very disappointed in the finished product for a few reasons but everyone wanted to see it installed so here it is. the cf is wavy, its not cut straight, and the piece is as flimsy as a piece of paper.

enjoy... (or don't)

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[SD99GST]

heres the install of the group buy rear cf lip from this thread
http://www.dsmtuners.com/forums/vendor-announcements/346785-rear-lip-group-buy-pics-contact-info.html#post151963511

below are the pics. believe me, i am very disappointed in the finished product for a few reasons but everyone wanted to see it installed so here it is. the cf is wavy, its not cut straight, and the piece is as flimsy as a piece of paper.

enjoy... (or don't)

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

I was curious to see how it was going to look in the little exhaust tunnel, dont like how you can see the red, wish they would have went deeper in.

By the way, like the powder coated rims, for sale by any chance?!

 

[Choch1]

LOVE IT!!! Cant wait to get mine.

 

[gofer]

I was curious to see how it was going to look in the little exhaust tunnel, dont like how you can see the red, wish they would have went deeper in.

By the way, like the powder coated rims, for sale by any chance?!

i was hoping it was going to extend the length of the bottom of the bumper and cover the exhaust cut out as well... the way its on there now theres an edge underneath that can catch air and blow it off. maybe that was a "get rid of the ugly rear lip the easy way" feature the designer added?



p.s. no rene the evo IX rims aren't for sale...

 

[BoostedinSoFla]

It might be a POS product as for as the manufacturing process but it does look good to a certain extent. I'm not sure if it's because you have the CF wing or what but it doesn't look half as bad. Definitely not worth the money though. Maybe another company can duplicate it but with better quality manufacturing this time around.

 

[gofer]

LOVE IT!!! Cant wait to get mine, amazing product for the price, Just cant be beat.

It might be a POS product as for as the manufacturing process but it does look good to a certain extent. I'm not sure if it's because you have the CF wing or what but it doesn't look half as bad. Definitely not worth the money though. Maybe another company can duplicate it but with better quality manufacturing this time around.

you guys serious? these responses are def. not what i expected. i guess these pics do it too much justice, gotta see it in person to see how bad it really is. if you look at it straight from the back the top of isn't even cut straight across if you compare it to the license plate mount. looks very cheap imo.

i guess im glad everyone thinks different about it though.

 

[TheOctane]

No i agree you can see the bad quality cutting...and there are ripples...I would want something more substantial...basically a little beefier.

 

[TSiAWD666]

Wow that looks like ass. Yeesh, sorry man. Extremely poor finish, looks bad, and of course not even close to being functional (unless its function is ballast), though function was only a remote possibility when they "designed" this piece (from what I recall them saying in their pre-order thread).

 

[907gs-t]

I'm glad i didn't waste the money on that P.O.S. pretty sad & i thought it would have been awesome but that's bad craftsmanship imo.Totally Lame.

 

[blackGSX2g]

Hmm, this is making me second guess getting one. Judging by the photoshopped pic, I was extremely pissed to miss the buy. I can deal with ripples and waves since I planned on sanding it down and painting it a textured flat black (don't like CF). The unstraight cuts up top bother me as I can pick that out right away; but I guess I could trim that down too since I wanted rounder corners. What gets me is that it is as flimsy as a piece of paper??!? Could probably do better with a roll of carbon fiber tape from Pep Boys.

I might be better off just taping off the shape I want on my rear bumper (straight lines and rounded corners) and just spray some undercoating or textured flat black on it making sure to go completely under the exhaust tunnel and bottom of the rear bumper.

Hopefully the production pieces will fix this.

BTW, cool job with the spoiler Corey...very EVO-esque.

 

[Killa_dsm]

Wow the quality looks pretty sad, especially since its not cut straight. For some reason I was thinking the ends would be a little more rounded like the photoshopped picture. I am glad I didn't jump on the group buy, and sorry you ended up buying a low quality product.

 

[gofer]

No i agree you can see the bad quality cutting...and there are ripples...I would want something more substantial...basically a little beefier.

i was gonna say, how can you not see that? im going to rock the thing for a few weeks (if it holds on there that long) since i waited 5 months for it. then put it on the shelf as conversation piece and as a reminder not to buy something that hasn't been produced before.

Wow that looks like ass. Yeesh, sorry man. Extremely poor finish, looks bad, and of course not even close to being functional (unless its function is ballast), though function was only a remote possibility when they "designed" this piece (from what I recall them saying in their pre-order thread).

hahah. i wasn't expecting function i was expecting more than pep boys quality though...

I'm glad i didn't waste the money on that P.O.S. pretty sad & i thought it would have been awesome but that's bad craftsmanship imo.Totally Lame.

agreed but i do have to get my money/wait out of the thing so ill leave it on for a week or so... im just glad i used JUST 3m tape, not the push in tabs like the manufacturer suggested, then id have holes in my bumper...

Hmm, this is making me second guess getting one. Judging by the photoshopped pic, I was extremely pissed to miss the buy. I can deal with ripples and waves since I planned on sanding it down and painting it a textured flat black (don't like CF). The unstraight cuts up top bother me as I can pick that out right away; but I guess I could trim that down too since I wanted rounder corners. What gets me is that it is as flimsy as a piece of paper??!? Could probably do better with a roll of carbon fiber tape from Pep Boys.

I might be better off just taping off the shape I want on my rear bumper (straight lines and rounded corners) and just spray some undercoating or textured flat black on it making sure to go completely under the exhaust tunnel and bottom of the rear bumper.

Hopefully the production pieces will fix this.

BTW, cool job with the spoiler Corey...very EVO-esque.

you might as well take a stab at making your own rear lip man. you'd have the pride of knowing you made it yourself, probably save some cash, & it wouldn't take 5 months to get either.

thanks for the spoiler compliments that things my pride and joy, better pic of it in my gallery

 

[gsxofftheline]

Wow! hmmm... uhhh? I don't know what to say.

 

[gsxofftheline]

It looks like the right side is slanted down, you can see the cut marks on top of the piece like it was cut with a jigsaw, its wavy, doesn't look anything like the pictures they portrayed to us in the begining. man that sucks. I'd say take it off.

 

[Blurred Talon]

Doesn't surprise me.

I bought CF layed fog bezels from them. The inside is covered in resin that I will have to sand away and over all they just don't look great for something that cost me over $100. I'd complain but after waiting a month and a half just to receive them, I won't waste my time.

 

[jjgrizz73]

Yes, very glad I decided to stick with the exhaust shield over this, car looks good though bud

This doesnt surprise me either, the fog light covers you can still see the dimples of the holes plus the gas door carbon starting peeling off that I had so I threw the red back on.

 

[Guest]

WOW!
I cannot believe how terrible that looks. Thank you for posting this, it has definitely made up my mind.
Also thanks for the info from the people who posted above me about the quality of their other products.

 

[gofer]

this is interesting how 386 customs is still doing business after putting out poor quality parts like that. maybe this cf rear lip will be the last nail in the coffin since its def. in the dsmtuners public eye at how bad of a job they did...
i took a trip to little ceasars to get some pizza and i was embarrased to drive my car, thats the first time since ive owned it ive felt like that. that big cf sticker thats cut cricked is def. coming off.

 

[SD99GST]

this is interesting how 386 customs is still doing business after putting out poor quality parts like that. maybe this cf rear lip will be the last nail in the coffin since its def. in the dsmtuners public eye at how bad of a job they did...
i took a trip to little ceasars to get some pizza and i was embarrased to drive my car, thats the first time since ive owned it ive felt like that. that big cf sticker thats cut cricked is def. coming off.

Wow... thats a bummer Corey. I dont even think Im going to take mine out of the box! Just leave it there and store it in the garage...

 

[Iroc_g]

I'm still waiting for my lip. I'm still going to hold my opinions till I get mine in my own hands. One thing I would say is there are still a lot of people that want one if these, so you could probably sell it.

The tHing that is bugging me right now is the negative remarks about 386's other products. Where were these comments when all this started? I'll admit, I didn't research their reputation. But I wish people would have chimmed in with these comments, to correct possible issues with the rear lip. It seems like the problems match somewhat to the complaints about the lip. If these things would have been brought to the groups attention, we could have asked 386 to ensure these wernt issues.

So all in all, I still like the look. This will be the only "bling" purchase I've made for my car in 3 years. I jumped on this looking towards the rear diffuser, which is ultimatly what I want for my car. My fingers are crossed that yours is a fluke.

 

[VergeTSi]

Damn you Corey why did you have to post this, now it's going to be hard to sell them haha. I really did expect something better for such a long wait.

 

[gofer]

i put it on this afternoon and when i got home my car sat in its spot and lost all its coolant, my car even hates me now.

damnit.

 

[1997_GSX]

That thing looks horrible, I like the Wing though!

 

[psycho]

It would look much better if the edges were rolled.

 

[dsmtun3r98gst]

WOW! that looks like if someone just started cutting rectangular pieces of carbon fiber and shipped them out to whoever paid for it.... looks way different/cheaper like the one they posted on the silver eclipse. good thing i didn't order one.

I wonder what 386 customs has to say about all of these negative posts .

Funny things is that 386 customs advertised this as a Carbon fiber Lip even though it looks more like a Carbon fiber cover.

By the way thats a great looking CF wing man, liked what you did with it