Putting head back on after month of sitting and now lost.

[rob1621]

Ok so my head was finally done being rebuilt and now after it stood for a month, i kind of forgot how to put it all back :/

I do have the head back on but its all the things i had to take off that i forgot.

Sooo first question, on the fuel rail i believe or maybe even the intake manifold, when looking at the engine standing in front of it, all the way on the right, there is one tiny nipple where a hose goes on and then a big nipple (brass thing where a boost line would go) that i cant find a hose that it goes on or anything like that...has be kind of worried.

Thats the only question i have right now, ill be workin on it through out the day so if i have more questions ill def be asking them here.

 

[Oliver@Slowboy]

Connect the thingy to the whatzit and a swift hit to the thing-a-ma-bob. Post me a pic and I will get you a real answer. hard to picture in my head without a DSM right near by.

Oliver

 

[SrKegler]

One is PCV valve, one runs back to the BOV, one runs to solenoid on firewall. One on the rear runs to the brake booster.

 

[rob1621]

Thanks guys.

I figured it out for the most part.

Next questions, i was connecting the hoses to the bcs restricter and im not really sure which goes where.

I have a 14b if that matters.

where does the top hose go and where does the bottom hose go off the BCS?

 

[defury]

Pics would be fab

 

[Red97Eclipseboy]

Block off the BCS. Worthless.

 

[TSiAWD666]

Block off the BCS. Worthless.

Assuming you have a manual boost controller he's right. Just leave the bcs disconnected from any vacuum lines.