owned by a piece of plastic

[beating4g63s]

So tonight was the final night of my motor build, put timing belt on, and the front timing belt cover and bolt down the oil pan finally and get ready to call a friend tomorrow to help me get the motor in the car, and oooohhhh what happens right when I'm bolting the valve cover back on, a piece of plastic that was from the old cam angle sensor falls into one of the spark plug holes, and right onto a piston, I nearly wanted to cry, after bolting everything back up making sure everything was into spec and having it nice and neat, this happens I've spent countless nights ripping this motor apart to triple and quadruple check everything and make sure nothing goes wrong.... now I have to ripe apart the head and get this one littttlllllee piece of plastic outta the motor, I can't wait to have this thing finished.

Also by the way the shell is finally done, the full 2gb conversion is complete swapped out the projectors for factory (gave my dad the projectors so he can see better at night) have all my interior finished and painted all the carpet and seats black, cleaned the engine bay up, but now one stupid little piece of plastic is holding me back for the moment.

 

[Rob10_99]

You should get a long plastic thing with tape on the end, try to fish that thing out of there!

 

[Fusa]

What would work better is a shop vacuum with a vacuum hose attached to the end of it.

 

[beating4g63s]

thanks guys it only took almost what 4 hours, 15 text messages, 3 calls, 2 beers, 8 cigs, and that piece is out, and the motors back together, timed again my eyes are blurry not sure if I'm tired or the beers or possibly both, backs killing me, glad I have my motor in my house, other wise I'd be insane by now, and oh yeah mitsu makes the cam angle sensor on the 95s the most gayest thing known to man. now the motors ready to be put in and I'm finally done.

 

[Rob10_99]

love the timing belt sided CAS! me too.

 

[ivan300]

note to self, put the spark plugs in when i put the head on