420A no start or crank

[420a99eclipse]

I recently bought an Eclipse and it has been sitting for a while.

Bought a coil pack and new spark plugs, hooked up a battery and tried to start it but no crank and just a click and a high pitched whine, then I noticed that the small yellow striped starter wire is cut off and can't connect to the starter. It leads to a small black plug and can be disconnected.

Does anyone know how I can fix this and if its a starter problem or where I can get a new connector

 

[97egl]

I would solder the wire back together and heat shrink it. If you don't have solder or heat shrink then I would go get a butt splice crimp with heat shrink covering and use that