The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

New engine start: oil pressure maxs out then bottms out

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Vegas Smith

20+ Year Contributor
5,193
3,155
Dec 2, 2002
Houston, Texas
Hello, I'm starting my car for the first time (somewhat), and I noticed that the oil pressure gauge maxes out after a few seconds then continues to bottom out and the dummy light comes on. At that point I got scared and turned the car off. So this is about a 15 second span. I have hooked up the dummy light and the oil filter housing.

I have turned the car on a few times before this (twice) for about 1-2 minutes and at that time I was not looking at the gauges but looking for leaks.

What do you think would be the reason for this? Maybe the gauge or sender is not working correctly? Thanks for any help.
 
Bad sensor, faulty wires, maybe? You really need to get an oil pressure gauge, the stock sensor is pretty much good for nothing.

If I'm not mistaken, when the two sensors are connected wrong or are grounded it will not function/stay at zero/or peg high. Correct me if I'm wrong though...
 
Yes that is what happens! Ask mw how I know I have the wrong (low pressure lightwire) on my stock presure sensor and ita pegged, but I have an aftermarket setup and thats how I gauge my pressure accurately.
Bad sensor, faulty wires, maybe? You really need to get an oil pressure gauge, the stock sensor is pretty much good for nothing.

If I'm not mistaken, when the two sensors are connected wrong or are grounded it will not function/stay at zero/or peg high. Correct me if I'm wrong though...
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

  • For sale 4G63 7 Bolt Oil Filter Housing
    7 Bolt Oil Filter Housing $50 + shipping & paypal feesYou must be registered to see...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 2g WTB 2g GSX rack lines.
    Looking for the line pictured that goes from one side of the rack to the other. Just need one...
    • jakk220
    • Updated:
    • Expires
  • Wanted 1g 92-94 Hood Needed
    Looking for 92-94 1G 2.0 DSM hood to replace mine that is dented and in need of replacement...
    • JLavetsky
    • Updated:
    • Expires
  • For sale 4G63 Tomei 280/280 Solid Lifter Camshaft
    Bought these for my 6-Bolt CNC ported head that was sold not too long ago, and already have...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 1g WTB-23 spline transfer case- prefer 300m output
    23 spline upgraded t case - 1g
    • erikoberdorfer
    • Updated:
    • Expires
Back
Top