Need oil filter housing fitting. 4AN-10x1mm. PLEASE read.

[Artago]

Hi all,

Ok so here's the problem. My OFH only has one filtered oil source which is the port for the oil pressure sensor (idiot light).

I need to tap into this. What I need (I think) is a -4 AN (JIC) to 10x1 metric adapter with the metric end being concave thread (like the idiot sensor).

I want to feed my turbo from this location as it is the only source of clean oil but I can't find an adapter that will work. I've tried a -4 AN to 10x1 metric adapter with the metric end not being concave, but it didn't work. I caught like one thread and stopped.

So what I need is a concave metric end JUST LIKE the idiot sensor.

Can anyone help me out?? PLEASE!!!

Tom

 

[knochgoon24]

What about the stock feed off the oil filter?

 

[Artago]

You mean the feed off the oil filter housing? If so, then I can't. I have a 90 style housing which does not have a feed cause 90 housings were used on 1G's with oil feed from the head.

Tom

 

[forcefed4]

You must be logged in to view this image or video.

You must be logged in to view this image or video.