Manual to auto swap trans bracket

[craig4g63]

I'm in the middle of an auto swap and in comparing the 5sp transmission bracket that mounts to the frame rail with the auto version, it doesn't appear to be much different. The centerline offset appears roughly the same. Anyone used the 5sp bracket that mounts to the frame when doing an auto swap?

 

[donniekak]

The height is very wrong, by almost 2 inches.

 

[craig4g63]

The height is very wrong, by almost 2 inches.

Hmm, thanks for the tip.... I'll have to look again, my auto bracket is in bad shape. The center bushing may be hanging lower than it should because the rubber isolator is split.