Making LICP is kicking my ass. anyone made their own?

[Royalty]

I got an intercooler from JR so i decided to run my own piping. From the UICP to the IC i have no problem. Its coming around that bend and getting between the fan is what i'm finding difficult.

Does anyone ahve pics of their 14b or 16g hooked up to custom LICPing?

 

[Royalty]

or do i have to cut that metal in the way?

 

[MindBlowin03]

I made one for me Supra SMIC and it was cake, but I do know the beds are a little differant. All I used was 2-90* bends and 1-45* bend. A little cutting and a couple of couplers later and Im all set.

 

[poorboyracing]

I have a JR fmic too. What style fmic do u have . Is it side to side or is it front facing intercooler. For one do u have a jpipe for the 16b. I have a big16g that i am using right now and i had a friend fab me up one. I can try an get some pic. for u this weeken. He made a one piece pipe. The jpipe and lower pipe all in one. I have the front facing intercooler that jr sell for 448.00.

 

[Royalty]

i have the side to side one.

 

[Royalty]

I have pics so far. This was easy

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[Royalty]

i need help trying to figure how to run the pipe around the drivers side

You must be logged in to view this image or video.

You must be logged in to view this image or video.

ANd from underneath

You must be logged in to view this image or video.

 

[superflip506]

You must be logged in to view this image or video.

which jpipe is this?

 

[2Quick4You]

You may be able to buy a 90 bend coupler from slowboyracing .... then it looks like all you would have to do is do a straight pipe out towards the driver and a 90 into the intercooler ...