Maf translator working or damaged??

[Winetalon]

Hey guys, im having a problem with my translator and the problems is that i connect it and it lights and start the car, but it doesnt idle and shutoffs and i have no throttle response at all and dies. Any suggestions will be appreciated!!

 

[92AWDHX40]

Terry's Talon Troubleshooting Tips #3 - Fast Idle (aka. Idle Surge)


http://www.dsmtuners.com/forums/articles-engine-fuel/191137-how-fix-your-idle-surge-problem.html


this for idle i would return it to stock first can be a pita to fix idle with maft, dsm link eliminated that maft problem, do you have a logger, shuts off check ecu to see if its good,

DSM MAFT Support [Archive] - Page 2 - Full Throttle Speed Tech Support

Dsm Idle Problem!!! - Car Forums and Automotive Chat





Full Throttle Speed Tech Support

 

[okm12346]

Is the car manual, what injectors are you running and what is the BASE setting on the MAFT?

 

[Winetalon]

The car is manual, i have not setup the maft corectly and i am running stock injectors 450cc

 

[92AWDHX40]

zero it out for 450s.

 

[Winetalon]

because if i use my car without the maft, when i mreving it it wont past the 3000rpm or 4000rpm and i don't know what the problem could be. im thinking that obviously it needs a maf or maf translator like the one it has.

 

[okm12346]

I dont mean to insult you but you have the gm mas hooked up instead of the stock mas, right?

As it was said above - open the box and set all knobs to zero

 

[Winetalon]

yeah all of it is in 0. and obviously is the Gm Mas, i dont even haev the stock maf of the car.But the problem is that my car starts and idles without the translator very good but with the translator on the car just dies, and i have it connected properly because i verified it already.

 

[okm12346]

did you have the battery disconnected for a few minutes?